ignition

ok, i did not take the time to see if this subject has been covered on here . So here it goes. i plan on upgrading my ignition from stock 85. to a 93 or newer digital igntion. I have a 93 flywheel and coil pick up. and am planing on buying a dyna 3000 box. question 1. is this all i need to...

I have a great battery it has plenty of charge. My recent problem is when trying to start my bike it cranks all day long, but no ignition. At first there was no spark and then I'll tried it again and it fired right up. It did this for a couple of days and now it seems to be completely dead. My...

I installed a dyna 3000 ignition on my 98 Max mainly because i needed a rev limiter. Im interested in its ignition advance and ****** ability but have a unique issue. The directions state the map sensor must be attached to the #2 cylinder to work. But i have VGas carbs and in John Cornells...

I have a read abunch of the posts on people with this problem but figured I'd post one my self. At first the problem was intermittent, the bike would drop cylinders and would carry a load and the tach would be pegged although I wasn't moving, simply killing and restarting and the bike...

Does anyone make an ignition box or add on box to interrupt igniton at a certain set point to provide full throttle upshifts clutchless?

My 1996 had no signal to front right coil I believe it is a band tci because the dummy who was supposed to fix carbs smashed those wire together and they were shorting to each other i repaired this problem and still no pulse. I wanted to test the pickup coil/s before i spend this money. the...

I'm considering getting the Dyna Ignition. Just a couple of Qs: 1) Is it worth it - have you seen gains and improvements? 2) Who should I get it from? I see UFO sells it. I like the ignition cut for redline it offers. I have a tough time seeing the tach.

Ok, guys. I am not the worlds greatest mechanic but i'm learning. Here's my problem. It started with my bike sitting for about 6 months without running. it's a 2005 max. When i turned it, it started pretty easily with about 2-3 cranks. However, when i started riding it had little to no power...

I stick my key in my bike and get ready to ride...just to find out my ignition is taking a ****.I turn the key and nothing. After shaking the key a bit the lights come on and it can be started so long as I dont touch the key because it will turn everything off again. Both the big bike places I...

well. its getting colder here in vt and its just about time to put the bike up for its winter hibernation. i was looking at my wish list of things left to do on the bike and decided it looked a little short lol. i'm thinkin keyless ignition! wondering if anyone here has any experience with...

Anyone know anything about the msd I coils for the max? What is the best value/performance option for replacement coils? :ummm:

Hello Recently switched to COPs and I now have four ignition coils in excellent working condition. I listed them on ebay for $25 each (seemed appropriate given other auctions) but got no hits. Anyone have any idea what they are worth? Anyone else in dire need of replacement coils? PM me...

Does anybody have an extra one of these? My pops needs one as one of his plug wires keeps slipping out of the coil. Thanks!

Is anyone running a dyna 3000, nology hotwires, and NGK DP8EA-9 plugs? How does this work? Any problems? The bike has VGAS, and 4 into 2 pipes thanks

Neat technology and nice read. http://www.liv.ac.uk/researchintelligence/issue36/laserignition.htm Looks promising. :)

IIRC, someone posted a chart showing the ignition advance of each setting of a Dyna 3000. I've done a search, but find WAAAAY too much to sift through. Does anyone have this? Also, does anyone happen to have a chart or somesuch showing the stk ignition curve on a V-max?

Installed my billet ignition cover today. Looks way better than the chewed up stock ignition (looks like someone once used a screw driver) But the key can't enter the ignition properly with it on. I will attempt filing down some of the rubber on my actual key... for now my first mod is a...

I have a question, This week I put together one of those timing advancer`s with the 470 ohm and 4k ohm resistor pack but, I`m not sure just what application it is used best for 1: taking off w.o.t. from a stop sign ?:confused2: 2:opening it up on the freeway ?:confused2: I`m worried about...

I e-mailed Tim (the VMax Guru) a while back with a few questions on the gen 1 pickup signals. What I was hoping for was an easier way to get a 4 to 8 cylinder tach to work with the VMax. My idea was quickly shot down, but Tim did provide some nice data that I asked him if I could share with the...

Has anyone ever tried running two MSD ditributorless digital box's as an ignition system on the Max? Or has anybody ever tried a distributor mod with a single box? Lookin at these: http://www.msdignition.com/info.aspx?taxid=4&taxid2=108