kit

I found this on ebay today and thought that i would post - if you need to fix your 2nd gear splipping issue...

Has anyone done this mod and is it worth it??? :confused2...

I am considering a Jet kit for my bike and was curious as to who makes the best kit?? Also, do I HAVE to change my exhausts and what stage kit should I get. I just want an increase in power, not something radical.......Thanks:ummm:

I looked for a previous discussion. But found nothing on this subjet:confused2: I know this is probably a stupid question.........Do you have to disassemble the lower tubes and remove the fork seals to install the kit? Thanks!

I am New from Denmark and i hope some can help Me, i have buy a new exhaust from USA Jardine and i buy also a Dynojet Stage 1 for my bike. Can someone help me whit the jetting, they are saying that i have to needles on groove 3 and using main jet 170 but i dont now if the Jardine is a medium or...

I finally purchased my Vmax after over 20 years since I saw my first one, thanks to the help of this forum. I bought a '92 that has some customization. I plan to do some "tinkering" although I am far from a mechanic, I have always been mechanically inclined. I have never purchaed tools (have...

My bike has the kerker exhaust with the 1 3/4" baffle. I love the sound but was thinking of going with the 2" or the 2 1/2". I usually run with the baffle out and just the end cap with the 1 3/4" opening. With the baffle in my bike bogs down, it feels like to much restriction and loads it up...

Well, this is going to be a multi-post thread, but I wanted to keep anyone interested, updated with my progress. I am in the middle of (actually I'm just getting started on) getting Sean Morley's Muscle Carb Kit installed as well as getting a little laughing gas put in. I purchased a Nitrous...

Does anybody have or know where I can get instructions for installing a Stage 1 Kit on my 06 Max? Something with pictures as I dont know a thing about carbs. I'm just to cheap to take it to someone and have them **** me on labor!!:ummm:

Well look what I bought to play with - Barnett Carbon Fibre Friction Plate Kit :banana: With instructions that mean bugger all to me :ummm: Does anyone know why there are eight plates in the set :ummm: Where does the little plate go :ummm: I'd appreciate some assistance from anyone who has...

is there such a thing as o-ring kit for the carbs? or how do you go about replacing them all since the carbs have set for 13 years they run good its just that when we teared into them this spring the o-rings were showing signs of dryness and need to be replaced or is there an overhaual kit for...

Does anyone have pictures of installing progressive front springs? Im looking for a step by step for a disassembled and reassembled of the front forks, the manual is a little vague. I?d really appreciate any good advice. I?m mechanically inclined by have never dissembled motorcycle front forks...

So I got my max almost a month ago. First thing I notice is that it sucks the gas down like no tomorrow. I take the vacuum diaphragms out and notice that the pilot air jets under there are labeled "150". no other marks or indicators of brand. So I take the needles out and drop them a notch and a...

Hi i m from France I ve recently bought a Factory Pro jet kit for my V max (ref Y11-1.1 ti), and have some difficulties to adjust it. It s an European 2000 V max with : Main jet : 152.5 was 150 Pilot jet 1: 90 was 95 pilot jet : 37.5 was 42.5 needle clip...

What's the difference between the Morley kit, DJ stage 7, 1 and Factory Pro? I've been looking around the site for info on the Morley kit. Where can I read about it? How much does it cost? Brenden

I have a brand new Dyno Jet jet kit that I ordered for a customer and they never picked it up, asking $50.00 plus shipping.

Anybody put a chopper kit on their bike?

Anybody put a chopper kit on? I am thinking of a 14 degree chopper kit on. Am wondering if it's going to be really hard to turn

i figure the bike is worth 3500, so that puts the 330 kit at about 13k :surprise: http://cgi.ebay.com/ebaymotors/Yamaha-V-Max-ATTENTION-GETTER-MEAN-MACHINE-330-REAR-TIRE-1989-YAMAHA-VMAX-HOT-ROD_W0QQcmdZViewItemQQcategoryZ50047QQihZ018QQitemZ280112050306QQrdZ1

i HAVE THR MORELY MUSCLE KIT, i HAVE CORRECTORS INSTALLED SLIDED DRILLED DJ SPRINGS 162.5 MAIN JETS STOCK NEEDLES, AND MODIFIED FILTER LID. mY CONCERN IS AT ABOUT 3500RPM IF I START SLOWLY COMING ON THE THROTTLE i GET A CRACKLING METALIC INTAKE SOUND THAT PASSES AT ABOUT 4500. iTS SO LOAD IT...