led

So I've been looking at different headlight options for the heck of it to see what's out there. I like a little more modern look personally and was wondering if anyone has tried the 5.75" LED like the one in the picture below. It's 100mm (3.9") deep, I haven't taken out the stock Vmax light in a...

I installed an LED light bar on the max yesterday, now the bike won't hold a charge. I am getting roughly 12.00 volts at idle. Bench tested the stator and it checks out. Could the new light have fried the regulator? Anyone else have charging issues after installing auxiliary lights? Battery...

Picked up a set of smaller led turn signals for the front of my max. Installed them and of course im getting a hyperflash. I understand why its doing it. Just wondering if someone can point me in the right direction to get s couple resistors. I dont know much about them and have never had to...

A while ago I bought the reflector replacing LED Tail/Brake Light from Sean Morley, and I finally decided to put it in. I connected it before installing it, and both the running light and brake light worked as expected. After mounting it, I reconnected it and only the tail light worked, no...

Hi, my headlights a bit dim, and Im considering putting in a led insert or changing the whole light. Has anyone tried fitting something like the HD Daymaker China copy or similar I was thinking of bying an EMGO 7inch lamp kit and a Chinese copy like in the link. Has anyone done something like...

I just received my ufo radiance LED front turn signals and a flash relay box. Questions: Can I run the front leds and keep the back ones stock or will I need to change both to leds. I don't mind the rear stock lights but hated the way the front signals looks and the way they moved in the wind...

Front or rear flasher LED in stock housing and lens I made it with LED driving light Dont mess with the bike it`s a Venture with a Vmax front end At the front end the LED stays on as position light and when flasher goes to blink, the micro relay blink them off, this way highest...

http://www.cyclopsadventuresports.com/3800-Lumen-H4-LED-Headlight-bulb-_p_83.html Wondering if anyone has giving them a try and what they thought about them? Had to ride home in the dark the other night, even with high beams on it left much to be desired. Lol

Does anybody know where I can get LED bulbs to replace my stock ones? I just ordered some smoked lenses and do not want to alter the stock look. They need to be amber colored too. Thoughts?

Hi folks, new to the site. Just picked up a clean 07 Vmax. Just getting back into the saddle after a few years. (Broken ankle) I want to clean the old girl up and since I quite enjoy twilight riding I want to also brighten things up. Hopefully this turn I won't get unnoticed and run...

Well I replaced all 4 stock turn signals with LED mini signals, I did put a new flasher relay in, when I would turn the left or right on all 4 would blink:bang head: I did some research on the site and I removed the indicator light and it stopped, then I installed a diode on the indicator...

I just installed this headlight on my bike.... haven't road tested it yet, but even with low beam on, it sure is bright!!! I will post pics soon.... http://dkcustomproducts.com/Premium-White-LED-Drop-In-Headlight-Bulb-H4-Fits-All-Harley-DK-H4-HL-LED.htm

http://www.amazon.ca/SODIAL-Flasher-Blinker-Motorcycle-Indicator/dp/B00LHMWQXO/ref=pd_sim_sbs_s_2?ie=UTF8&refRID=1M450CVZG108Z69BVY5D Is the pin configuration correct for the Max?

Here is what I did today...I really don't like it but it will work for now...im gonna look for a analog voltmeter, ya cant see it in bright daylight,, http://www.ebay.com/itm/171254364420?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Hello, I am ready to upgrade to LEDs on my 2004 vmax. For my other bike (Shadow Aero) it was very simple to connect the PNP relay but for the vmax I am confused from reading other posts here. Couple of questions: 1- Do I need to replace the factory relay (5 pins -- picture attached) with...

Wired the signals up and they just flash versus individually signal. Any thoughts? Fronts are the basic LEDs and I wired hot to hot, ground to ground and didn't use the blue (running light) and they both flash at the same time regardless of using left or right turn signal switch. Same in...

Basically the headlights on my 98' are nowhere near bright enough for me and I figured with LED I'll save a few watts and get much more lumes.:punk:

I want to change turn signal bulbs to LED. Do I need this? http://www.tobefast.com/Custom-LED-Electronic-Motorcycle-Blinker-Flasher-Relay.html or http://www.ebay.com/itm/181264817629?_trksid=p2055119.m570.l4456&_trkparms=gh1g%3DI181264817629.N8.S2.M935.R1.TR4...

One of you guys have brought red LED for Gen1 cluster on Ebay or else :ummm: Search for that post ,,,,,,,,,, i don`t find Do any remember that?? For myself, i`m serching blue one Regards:punk:

Hi dear All, I bought my Vmax recently without the brake light. All is fitted in the indicators, back light and brake light. The entire original indicator assembly is missing. So I intend to re-install the original LED brake light and found one in AMAZON with the remark: not to be used for Vmax...