light

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Brake light issue

    Both of my lights work but not when I brake. any idea what I should look for to fix this?
  2. frank5079

    Light switch

    I've always modified my bikes to have on/off switches for the headlight and running lights; I do run with my headlight on(hi beam) during daylight hours for conspicuity. Anyway, this is the only mod I plan for my 'Max....
  3. jagco1

    Paint remove easy head light bracket

    If you have some old part needed to remove the paint off of them you may try brake fluid DOT-3 - it work for me. It can't hurt to try it. No hand work no mass. I have a head light bracket that the black paint was scratch up a little that I was going to have it powder paint today but man the...
  4. P

    oil light

    why dose my oil light flash under hard acceleration ?
  5. S

    UFO Tail light & Turn signals

    Has anyone installed/using the UFO non-led turn signals and Tail light? If so how bright are the turn signals? I'm trying to stay away from the LED ones as i'm not electrical savy, and don't wanna fool with a resistor. But, i could probably figure it out.. With my job I work with copper...
  6. charlieRobinson

    LED light kits

    Hey, guys. I really enjoy riding at night but I keep having the same problem.. cagers not seeing me. I see lots of dudes around town riding with lit up bikes, LEDs i'm sure, and i really want to light my max up too. Any reviews/feedback on LED light kits? Any recommendations? Advice...
  7. you2low

    $9.00 Led Brake Light

    Drill one hole for the wire to go thru and one wire for ground to the bolt and the other bolt holes line up and then tie ground wire into your bike ground wire and the wire from the light to you yellow factory brake wire and your done.. 30 minutes and $9 = added safety ... I Hope:eusa_dance:
  8. donnelly317

    Fuel light won't shut off?

    I don't know where to start. Installed LED's in warning lights is the only thing different. Sent from my SCH-I535 using Tapatalk 2
  9. NHVmaxpower

    WTB brake/tail light LED

    Does anyone know of a place to get a brake/tail light for my tail piece? It can be up to 7" L x 1 7/8" w low profile or up to 1 1/2 " thick & rounded corners to go w/ the profile of the tail, prefered LED. I have been looking online w/ no success hoping maybe someone knows of a place ? Thanks
  10. R

    Please give me your opinion on driving light location

    I want to add driving lights, but don't want to alter the style, etc. I am considering 2 options: See yellow marks on pic. A) a single horizontal LED strip ( Or a rectangular fog type) under the main headlight, somehow attached to the headlight bracket. B) adding two bullet...
  11. R

    Anyone try Custom Dynamics LED tail light?

    It looks like a good solution for a stock look. just curious if anyone has tried, and feedback on how well the LEDs shine thru the red lens??? http://www.customdynamics.com/Yamaha_tail_retro.htm
  12. R

    Final mod, brake light when in neutral.

    I decided I wanted to do this mod. This is a mod that will light the brake lights when you are in NEUTRAL, only if the KICKSTAND is UP. I first discovered rear brake modulators, and realized that would be a good safety addition. Those send various flashing patterns to the rear brakes when...
  13. jagco1

    Rear grab rail light fitment

    Check out other thread so how I made 2 thread's - pictures are on the other 1. Hi guy's do you think this light will fit the grab rail opening. Man this would be a good thing for a extra running light / brake light. It has 3 wires. Price is $16.99 Lens Size: L 5 1/8" x W 1" (13 cm x 2.5...
  14. jagco1

    Rear grab rail light fitment

    Hi guy's do you think this light will fit the grab rail opening. Man this would be a good thing for a extra running light / brake light. It has 3 wires. Price is $16.99 Lens Size: L 5 1/8" x W 1" (13 cm x 2.5 cm) Brings you more safety, Visible By All Traffic Built in 20 LED bulbs...
  15. tothemax93

    oil light question

    Last year my oil light would come on under very hard exceleration. later in the fall it seemed to come eaiser and more often. over the winter I did the o-ring fix, so I had the pan off. changed the oil, everything looked good. fast forward to today. This is the first time out this year. The oil...
  16. hypermax

    My cat eye tail light fab

    My first post here! I decided to modify the fender liner for a cat eye taillight and my own license plate bracket. I used a spot weld drill to remove the license plate bracket without damaging liner. I traced out the license plate bracket shape I wanted on paper then made one out of 22ga steel...
  17. shicks16

    For sale: cycle one off pressure gauge / Raptor shift light

    Well I need to fund more mods on the bike and since I am switching to a koso gauge I figured this isn't needed anymore, it's a cycle one off setup that includes a oil pressure gauge painted red with a red line (there is some scratches in the paint) a red raptor shift light and a custom bracket...
  18. NHVmaxpower

    Universal gear indicator light

    Has anyone ever used one of these? They are cheap & I'm sure there are others guys like myself are always looking for another gear when your already in 5th . Any opinions on this? Comes in red or blue...
  19. NHVmaxpower

    Shift light options

    Wow finally back online in the new house n settled in. Anyway what are some options for shift lights? I was going to get the harlan but there is no order form on his site and read some not so good customer service .. I am on a budget so the pricing on the harlan was great are there other...
  20. hijacker

    Installing Raptor Shift Light

    Step by Step instructions to install a Raptor Shift Light on a 1st Gen. It's much easier than I anticipated... 1. Remove seat, faux tank cover and disconnect negative battery cable. 2. Remove the air filter cover and air filter. You may want to stuff some towels into the carb...
Back
Top