lights

Sorry for my newbie-ness, but where is the fuse for the running lights???:ummm: TIA Frank

Morning all, I am hoping for some help with this. I want to change the signal lights on my 04 Max but am having a real hard time finding the small black, bullet style lights I want. I ordered some off of Ebay and they look awesome but they do not fit, came with 2 wire assembly and...

Brighter 1157s in the taillight. (wired to BLINK with the Signal Dynamics BACK OFF brake light modulator) Custom Dynamics LED license plate bracket. (dual intensity, operates normally - bypasses the SD Backoff brake modulator) Then I added a yellow LED reflector to the luggage. I tap into the...

Ok everything in tail hooked up fine. But if I put my front signals on the running lights the blinkers act as four ways. The signals are the bullet led Kuryakyn lights I have to load equalizers on as per Kuryakyn tech support still does it. I even put diodes in on each side to the blinker...

Recently acquired late model Gen1. UK based but the lights set up is US with permanent lights on. Any information please on how to amend, so that I can decide when to light up ? Do appreciate there might be info already on the forum, but it's so comprehensive and searches have been fruitless.

Just was wondering if everything on the bike must be plugged in for things to work? Every since I installed the smaller running lights/turn signals I've had gremlins, you hook up the ground up front and the red signal wire to the bike's turn signal wire and the signal would flash normally but if...

Just recently someone posted a thread on LED instrument lights now I cant find it! It was simple strait forward with P/N's and website to get them from :confused2:

I bought one of these CIPA 93271 Red 4" and installed it over my #2 and #4 cylinders. Hooked it up to one of my running light wires off my tail light. 3 little LEDs have drained my battery to the point it will not start. I have disconnected it and charged my battery. Runs and starts fine now...

Hey guys. It's been a while, but I'm back....again. Can any of you tell me where I can find some super bright pink or purple LED gauge lights for my 1997 Max?!

Finally finished the lights on my Max.Now if I can just find a cheap ignitor so I can ride it,lol. http://youtu.be/OAJ9cZ7UE8Y

my vmax runs great and idles perfectly for the first 30 minutes or so. then it will die while sitting at a light after it has heated up real good. taking off is somewhat choppy, but it runs great at partial and wot. i'm replacing the plug wires when they come in. don't think it is fuel-related...

I just bought a 01 Vmax the other day and was wondering how to take apart the Speedo, and other gauges to replace the lights with led ones.

I'm just about to give up and say my first Colorado RV trip just wasn't meant to be.. 1991 ck2500 Chevy 4x4. No trailer fuses to worry about. All fuses (one set) are in the dash very far low left and have been checked. When the truck's lights work.. There is power at the 6 pin plug...

Need some help...? I bought some nice led blinkers. And with that two resitors for reducing the blinker speed. But after connecting this, the speed is still to fast like there are no resistors installed. The resistors are paralel installed on the led lights. Between the + and the - and one...

OK, as indicated before, I'm a Light freak. I've got flashlights, lasers (powerful enough to light yer cigarette) and Light gadgets EVERYWHERE. I have decided to check out the inside of the gauges so that I could see exactly how hard it would be to replace the stock incandescent lights with...

Another interesting dilemma: My tail light(s) don't work. The brake lights work fine, though. I have checked the bulbs, and both filaments appear to be in good shape. I checked the fuses, all look normal. I checked the connections under the rear seat, all were set firmly. I might buy 2...

Hi there, I have a (mayby simple) question. I noticed lately that the front turn signals do have an other bulb (twin bulb) then the back bulb (single bulb) Also the front has an extra wire (blue) for powering the twin bulb at the front. But in my 96 bike is this wire at the front not...

Anyone know where KJshover got his twin headlight setup? I want... bad ass.... thanks... D:punk:

I changed rear signal lights,had a short at new light,and blew the fuse.Fixed the short,and replaced the fuse.Fuse does not blow now,but signals still do not work.Is it possible that something else blew.like a flasher relay,or something like that.Or did i fry a wire somewhere.

Hello All, I just recently had my 16k mile service performed and when I got my bike back, I discovered that I have no running turn lights on the front any more. I do not want to take my bike back up to those guys due to the fact I don't trust their work any longer. Where is the most likely...