low

Browsing the GP Bikes website and found a low mileage 2001 VMax for sale :http://www.gpbikes.com/new_vehicle_detail.asp?sid=01820795X1K4K2011J2I02I11JPMQ6135R0&veh=650&pov=1965384

hey guys, I am getting low on harnesses again! If I do another run I will be switching suppliers again for the resistors. I am looking for someone that actually has "better service" seams like that is a rare quality these days. This supplier is telling me 8 weeks out for the resistors Yuck...

I am having fits w my 95 vmax not wanting to run at low rpm. At first I thought it was the low rpm circuit in the carbs but it was running perfect only a few days ago and I went through the carbs just to make sure. It seams that the front right and rear left cylinder are not firing at low rpm...

Have had no issues with my baby, but it has set up for a couple of months and not rode. I cranked it up yesterday and noted that I had to keep the choke slightly on or it would die. When I revved the throttle it wanted to die, but when I rode it at mid rpms there was no issues. Only when I...

Well, I went for a ride on Saturday for a bit and came back and had bunch of oil on my engine. Not the typical seeping oil but splashes. It looked like it was coming from my airbox so I figured it was leaking from the carb joint which goes through the airbox. I was right, one joint was loose and...

Got the oil pan back on last night, and the next step on the video was to reinstall the low oil sensor. On mine, there's no wire coming out of the sensor, but instead there's a screw in the opening, and kind of a 45 degree angle coming out of the hole. Is the wire supposed to be embedded, or is...

Sorry folks one thing that's not my FORTE are my computer skills. I forgot to attach the acompanying photos with yesterday's post. :confused2: Yankee

As a new member I'm thankfull for all the advice I've received. Allow me to share some of my expertise - customizing award winning motorcycles. 1) The desire to personalize one's motorcycle is an inherit trait of nearly all motorcyclist but before you open up your wallet have two thoughts in...

Does any body else have to stand on their tip toes while siting on their Max :damn angry: Well I use too. Plus the bike was so tall,..It was like mounting a horse. YA,..I'm a little guy.....with a need for big power :eusa_dance: So heres my low buget, labour intensive fix.! I took some carboard...

The fuel pump took a dump on my 85 max. I was going to order a new oem until I figured out they get $150+ for one! Anybody have a good suggestions for a replacement that will be reliable and lower cost. I have seen the junk crap at the parts store that last 2 days, so thats not an option...

Hey guys want some input i noticed I was a little low on clutch fluid, its always worked fine, dont see and spots on the garage floor indicating a leak. So should I assume I need to rebuild slave, or just drive and watch, I am going to flush the system had the bike a year and its the only...

So I have my vmax all apart and looking at my rear tire and wondering if it's time to replace? I have 2 seasons on this tire. Think I should finish out this year?

hey I have just picked up a 2000 MAX and that has been sitting for some time I cleaned the carbs and and it runs great, but it has few issues! 1 it has a slight popping (small back fire) when I let off the gas. 2 the mpg really sucks its about 92 miles then my res. light comes on. This is my...

Ok, guys. I am not the worlds greatest mechanic but i'm learning. Here's my problem. It started with my bike sitting for about 6 months without running. it's a 2005 max. When i turned it, it started pretty easily with about 2-3 cranks. However, when i started riding it had little to no power...

Just thought of something... I have the Hindle pipes and they sit rather low. Is this going to affect jacking up the bike on the motorcycle jack?? ________ mary jane

just curious what would cause a surging while holding a steady throttle in the 1500-2500 rpm range. example would be cruising down a neighborhood street. it will be smooth for a bit but then start surging. to the point i sometimes have to pull the clutch in and blip the throttle for it to stop...

'97 Max, not new to the "o"ring problem. Pushed out in the past, now updated with the late model elbow, but, oil press. always low so I pulled it apart last night to check again, o-ring looked good, now what?? Oil press. is at zero at idle until about1600-1700 rpm's, then about 10 - 12 psi...

I recently bought a 97 vmax. Just got out friday and drove it to work for the first time. It didn't run very good. At any speeds below 50 MPH when cruising one cylinder is missing and popping. Only when cruising, if I get on the throttle it disappears. Also it doesn't matter what the temperature...

Has anyone found any low profile accessory switches that mount on the handlebars? Other than a big universal kill switch?

My '01 with 9300 miles sometimes hesitates and sputters upon light acceleration. At 2000 rpm and above, the bike is strong. V-boost kicks in around 6000 and the thing really hauls ass; no problem there. The dealer I bought it from and his tech says everything seems okay and Vmax's are very...