master

Hi would like to know if the stock vmax clutch lever fits with the fjr1300 clutch master or do you need the lever from the fjr

Hey guys just wanted yo ask if anyone knew what the diameter of the stock brake master cylinder is? I have R1 calipers off an 02 and thinking about putting nissin remote res on just want to work out stock diameter I know R1 is 14mm.

Edited for content

Does anyone know which of the three pins I need to attach the vmax clutch wires to? Sent from my Galaxy Nexus using Tapatalk 2

Hey guys.....I just converted to busa calipers...everything went fine got some lever feel, then while bleeding the master sprung a leak at the plunger. went ahaed and got a gsxr 600 radial master...all hooked up, been bleeding everything over and over for days and can't get a lever....no leakes...

So my front brakes had zero stopping power and a friend of mine helped rebuild the master. MUch much better feel. I had previously attempted to bleed the rear brakes (even though they were in fine working condition, would almost stop the bike, even without the front brake), but after they...

Anyone remember offhand what Yamahas use our same clutch master reserviors? I'm still looking for a clean stock one and I got one reply. I guees I'll turn to the dark side and peruse Fleabay. I checked for FJR masters this evening. No joy. Anybody?

My clutch lever started going soft on the ride yesterday, and just now when I went to put the bike in the garage, had very little clutch at all-wasnt releasing all the way, and very little resistance at the lever. Im assuming its time for some rebuild kits, slave and master( might as well do em...

Well i got a Nissin master in from kyle. only one problem it doesnt have the switch for brake light! can someone post a picture of theres? i cant seem to find anything on the internet i need to get one

I have an 89 & the front brake master just went out. I really don't want to use another max master. Anyone know which master from other bikes will fit the max? Will my factory brake switch hook up or will i have to change that also? Thx.

i have a 95 max i got in a accident and the brake master is leaking, i found one online for decent but its off a 86 model, anyone know if this will work i know most parts are interchangable but ive also seen some year seperations for other parts

Does anyone have a good source for the clutch and brake master cylinder cover screws? Mine are all chewed up and I need to replace them before I have to easy-out them. Surely there are some stainless ones out there...?

Hello Guys need to get each side of the clutch and master cylinder diaphragm for my bike who is the cheapest out there?

Does anyone know what the size of the small orifice is in the brake & clutch master cylinders? If I could get a size for it, I will look into buying a quantity of the drill bit needed to clean this small hole out and make them available. Should be around a $1 apiece in bulk. I don't have a set...

Dunno if this has been posted before, please delete if so. http://wiki.sabmagfaq.org/Site_glass_replacement

I am new here, bought my vmax a couple months back and have been messing around with it. I just finished up fork seals, steering bearings, and rebuilding the clutch master cylinder and lots of powder coating. After the bike was back together I tried bleeding the clutch and it will not build up...

Not too long ago I saw a thread from someone that replaced their master cylinders with some aftermarket ones and they included a link. I tried searching but haven't been able to find it. I forget the brand name, but I remember them being decently priced. You picked out the master and then...

Fixed

My Vmax lost all electrical power while driving, I pulled the master fuse and it was blown, as soon as I put in a new 30 it blew even without the key on I believe! Any ideas... regulator, stator.... some other item? I know it could be a bad wire but it has only lost the battery a couple...

hi i am about to rebuild both clutch master and slave is there a how to out there on these i dont have the book yet sorry if its already in threads:ummm: