missing

Knew something was screwy, further investinagtion revealed the vboost assembly removed by previous owner. Anyone know a good deal one one anywhere?

Hi Folks, Today I drove a little while in the rain. Not my usual thing to do.... But after a while I noticed that the engine during idle so once in a while run lower in rpm and sounded like he mist a cylinder. Only for one or two firerings. My first idea was maybe some moister somewhere...

Hello, I was adjusting the pilots crews for VMax, today I found that one of the screw was missing from carburetor, what kind of damage can this cause? If pilot screw is missing is it running lean or rich? /Jonas

Some of you may know but ive had my bike apart ever since i bought it in feb.. its going back together nicely almost done :) my passanger seat doesnt seem right can anyone guess what im missing here?? Thanks guys.. im gonna post a thread on all the before and after pictures im very...

I've got the Max running pretty strong now at wot to redline. Decided to see if there were any issues through the throttle range and there is a considerable miss or stumble between 5500-7000 rpms ( part throttle ) although it will jump over it at wot. The V-boost is working, stage 7 springs...

Okay I have my first set of super trapps, the pipes are all that i received. I ordered 2 inch t clamps from summitt racing and they are too big. That was after they ran the super trapp number. Also one of my rear down pipes seems to be too short, if it connects on the top the bottom is out. Some...

Greetings: 88 VMX pretty much stock except for exhaust and K&N filter. Pulled the carbs out and went through them completely. While they were out, I used DeOxit and dielectric grease on all the connectors. Put everything back together, started it up and it ran at idle although one cylinder...

please check this out and if you have seen anything please report it. http://www.youtube.com/watch?v=AOC0Ljnrwxk This girl's mother works for one of our customer's at work and is desperate to find out anything. thanks for your time, bill

I am looking at a 2005 Yamaha VMAX 20th anniversary edition badge #1049/2000, It has 10,500 miles and is missing not the badge it's self on the tank but just the number 1049/2000. Just that significant piece. Seems to be a piece that is glued into the badge but the owner says it must of gotten...

Long-time lurker, first-time poster... I began installation on my '88 of a Russell clutch line yesterday. No instructions included or available on their website. However, it appears to me, based on the angle of the fittings and the length of the line, that you need to retain the stock hard...

I couldn't decide where to put this so I chose a General Forum. It involves my clutch, a dyno run and the mystery of about 20 missing Horse Power... It warmed up a little here in Not so Sunny Florida. I took Mary and we went for a short ride tonight. About 10 minutes into it, I jumped on the...

I bought an 85 Max about a month ago & have only had a couple of days to work on it so far. I did notice last night when I was changing out the plugs that there seemed to be a vacuum hose missing. I say this because when I removed the spark plug from the back cylinder on the left side of the...

I removed the valce covers to do my valve adjustment and have noticed one of the oil plug things on the top of the camshafts is missing. I was not paying attention when i removed the cover so I can't say if i knocked it out or if it was never there. I pulled another plug to look at it and...

This a good one. I'm doing the oil pipe o-ring job today and I appear to be missing the fastener that goes through the rear-most pipe coming off the main gallery supply pipe where it attaches to the engine. It's the pipe that looks it has a banjo type fitting on the end of it. Does anybody know...

I started hearing a click sound when I hit the front brake at low speed, when I looked down I noticed I'm missing the top bolt to hold the caliper on. Nice huh? Anyway does anyone have or know what size bolt I need ? I have the newer forks with the 4 piston calipers. Any help would be...

Never paid attention with the other oil changes but since Sean made a vid of how to properly assemble the early style filter, I paid attention. Changed my oil today and I dont' have a spring or washer. I'm guessing the issue will be how well the filter works, and the oil was pretty dirty with...

I was out riding on sunday (eatin some harley's) When out of the blue my bike developed a miss in the front right cylinder. It only shows up above 5000rpm but then stumbles bad . Has anyone had or heard of this ? Plugs all look good. need ideas thanks Mike

I had pulled my valve cover off to fix oil gasket. I found that a camshaft plug was missing(I did have some one else adjust valves). I was wondering if this could cause me any problems as the rest of them them were installed. If so where can I get a plug?:ummm:

1995 Yamaha V Max V-MAX, VMAX 1995 Yamaha V-Max Great Condition and Lots of Extras!!!Research 1995 Yamaha V Max Please wait Image not available Zoom Enlarge Mouse here to zoom in Please wait Image not available <IMG id=t_ivv4-13_12><IMG id=t_ivv4-13_13>...

Got to get down there real soon!