mod

I believe there is a oil passage mod or extra hole that is drilled in the main bearing area of the casing, does anyone have pictures of this?

I'm amazing.... And my woman agrees. Pulled power off battery, but relayed off of the "key on" position. Meaning when the key is off, the charging stops, as to not drain battery. Assumes a cell could drain the max. Tuffest part was routing wires, and finding place/room for the...

I have been checking out the Vrod mods and have a couple of questions. 1) What are the modifications to the stock wiring you have to do to do this mod? 2) Will the HID kit for a stock headight work in this headlight?

:bang head:That Monkey just keeps finding me:bang head: .Would someone come get him.:ummm: After all I had done already with the 200 tire and new tires and swingarm brace and seat and all the add ons i have done in the last I was just going to put new springs in the front ..:rofl_200::bang...

Well, I have been playing around with putting hydro graphics on airsoft guns and have come up with a pattern I think would look sick on Toxic. The upside is that I can do all the work myself and get a wicked looking paint job at a very minimum cost (film, activator, primer, and clear coat) and...

LOL...just ordered some 6 pot calipers from Sean....what is it about these bikes that makes you want to fix things and change stuff? Not in a bad way mind you....lol... :punk:

I have been collecting options for some time for my bike, a stock (relatively) 1992 I have had for 19 years. I have a set of Stage 7 Dynojet-kitted carbs, a UFO 4/1, COP's, Dyna 3000 & Dyna 3-ohm mini-coils, and misc. other stuff not yet installed. Should I leave it stock, or should I install...

1: how many springs do I need to do the double mod? 2: can I add 3 or 4 washers to compress the spring, making it tighter? 3: I have acquired 5 clutch springs off of a 500r Ninja, can I use them?

As a former Vmax owner and member of club, in the past I see posts on how to convert rear seat reflector and also radiator side reflectors to lights. Can anyone point me to where these links would be? Thanks for any help and I am glad to be back here again.

Hey guys, anybody using 06 gsxr 600 COP? I bought a set from fleabay and have a couple questions someone here might have the answer to. I get a primary resistance of 3.7-3.9. The secondary resistance is 13.8-13.9k (cold). The resistance goes up when the bike gets hot 14.9-18.3. I also get a...

Ok so I have the option,(kinda but not really.....$$$). Talking to my mechanic about redoing front forks and replacing seals,oil and springs. So my question is......Race tech emulators- or Progressive springs.....and why? the progressive springs are quite a bit cheaper. Is race tech really worth...

Saw on here you could buy the right hand side pivot bolt and nut to get a small bit of movement to align the swingarm. My question is... How do i install it now? book says to torque the left side to 73 lbs but i fear that will snap the Allen key... Anyone done this or know how to do it? it has...

So me and my buddy installed my new tack a few days ago. After a few hours and lots of turning the bike on and off, we got it all sorted, by that time it was a bit late and he needed to get home, and I needed to go to bed. The next day we planed a ride, so I get on my bike, attempt to get it...

I dont think I posted a picture with my bar end mirrors yet. So far to date I have changed..... Drag bars Mini Signals front and rear ( both from Sean , thanks! ) Bar end mirrors ( ebay item $32 shipped ) And I made a set of cylinder covers and I polished the air scoops ...

i have tried all kind of different disc mods and was wondering if anyone has tried a drilled end cap w/packing and no discs. this would shoot the exhaust straight out instead of diverting it to the sides. i want packing, because i am not into a real loud bike. anyone done something similar?

http://www.zanesvilletimesrecorder.com/article/20120613/NEWS01/120613009/Men-accused-spray-painting-chimp-images-churches-homes-arrested?odyssey=obinsite Just when you thought it was safe to leave the house, this happens! Mod Monkey obviously high on 'bath salts,' bites two OH youths who...

Ok, I discovered that all four of my coils were cracked. I decided to go ahead with the COP mod for simplicity sake, and you just can't beat the price. I had previously installed a Tboost set-up and it worked fine with the stock coils. After installing COPs, it would either come on at 7k or not...

Prevents the key ring holder from scratching the scoops also makes loosing your key much easier:rofl_200:

New Rear Tire Mirrors Forward Controls Lights Bars and 1-1/2" Riser Brake and Clutch Covers

Hey all, was thinking about painting my bike, but instead I'm pulling the trigger on some Tyga stuff. I currently have a chopped rear fender w/o a tail light. The cbr mod looks like the way I want to go, but have a couple of questions. 1. Can you get this light w/o the integrated turn...