motor

If you've never had an issue starting your 'Max, count yourself lucky, cause it SUCKS. I gather that there are numerous possible causes (weak charging system, the notorious crimp, cracked coils, poor grounds all around, weak battery), but it seems that sooner or later the starter itself is...

Hi everyone, and thanks for the help... I just got back from Iraq, and have a 2001 vmax... It has 19k on it and starts fine, my brother has been useing it and I noticed a ticking sound on the right side of motor sounds like a valve, but louder... The sound is their when clutch is pulled in. The...

Question about VBoost motor on pre '93 Max. Does it cycle when you turn the ignition on like the later model? Thanks in advance.

Hey guys. I noticed last fall that my Vmax was leaking on the left side of the motor. Now its on my kickstand and although not dripping it is making a mess, and sometimes will leave drops of oil on the ground (so maybe it is dripping?). This leak is on the left hand side of the motor above...

Anyone using these? I placed my order 2 weeks ago (instant payment via PayPal), and I haven't received them yet, haven't gotten anything regarding shipping, and they haven't responded to my email asking for an update.

1) Place bike on center stand. Remove tank cover, remove scoops Using large phillips screwdriver, unloosen the 3 screws on the black plastic plate on left side that holds the relays and module and let it hang down. On the right side, remove screws that hold the radiator cap and hose joint...

W000t :th_image003:I got my new motor mounts installed (late last night) the rear's were a PAIN IN THE ***:pullhair:. Anyways got all the mounts in, now just to put everything back on the bike, but won't get to try it out for another 4 months or so. Will I notice a big difference with the...

Link here

http://denver.craigslist.org/mcy/1470807321.html Not a bad price!

I have been looking into switching to solid billet motor mounts to improve handling because I cant afford engine bars(even though I want them SO bad!) So the question is how hard is it to switch the engine mounts? I dont wanna pull my motor, I would preffer to pull the old ones one and slide...

Ok boys and squirels im about to ask a question to what i made get made fun of or maybe not,does anyone know if you can remove the threaded rod that carries through the top upper motor mount that i think is used to lock the upper motor mount bolt in place.I want to remove this from my 02 as i am...

I've got my engine out because I'm replacing the transmission and am doing solid motor mounts at the same time....there's no better time to do it than when the engine is OUT of the bike! And, by the way, it was a ***** to get out. The solid mounts will only go halfway into the holes in the...

One of the casualties of the Ontario Drag Day is Billie's Vmax. It is now sitting in my garage after it died on the highway ride home. When the motor is cold it works OK but as it warmed up the clutch worked less and less until he couldn't even do 60 kph on the highway. Loading onto the tow...

My first suspension mod is going to be replacing the mounts with solid ones... I think. I know a lot here have done it, what I'm wondering is the best place to get them and either aluminum or derlin? Also, what should I expect in handling and vibration? Ron

what is the temp. of the "Dot"? I have after market gauges and my bike runs at about 220 deg. just riding around in the "Hood" is that too hot? Thanks

I had to leave the Vmax up on jack stands all last week as I was committed to pre-riding some of the day rides for the annual Concours Owner's Group National rally. It was in the fantastic riding area around Deal's Gap and I had to motorcycle camp the whole time...poor me.... Anyway, I got the...

I need to ship a Motor that I have sold. I have never done this before and would like some feedback/ideas on the best way to handle this. I have access to wood palets and a loading dock at work, so the I would like to strap it to a palet and have it lifted into a truck for delivery. The...

Hi, Has anyone found any good products that you can use on your motor to make the black really shine? Thanks Ron

With the side case off and looking at the flywheel, which way will the starter turn the motor, clockwise or counter clockwise?

How critical are some of the dimensions on these solid motor mounts? I know a few of them are not, but I'm thinking mainly of the 1.100" diameter that fits in the bore in the engine. Does this need to be a friction fit or can it be a few thousandths loose? I'm not a real expert on a machinist...