mount

Well this is my first post to the forum, and I have a '97 Max that I've had for about 2 months. I love the bike. But I now want to make it ME. I'm looking to lower the bike right now about an inch or so. I can do the front fork lowering mod, that takes care if the front part of the bike. Now...

I have a friend who will turn me some aluminum motor mounts (bushings) out of aluminum -- I just need the dimensions. Does anyone have precise measurements of the stock mount dimensions or a tip on finding them? Thanks in advance. P.S. If I make some and they work out well, I might have him...

Sean is out of stock and UFO will not reply. I'm scared to order any from ebay. Anyone have a set of (4) of these they're willing to part with?

I'm setting up my 3" over swing arm and I'm looking to see what others have done with securing the PCW shock extension to the pumpkin. It fastens to the axle, shock mount and to the shock. The axle portion is held on with the factory parts, and the shock mounts to the other end, I can put a nut...

I just bought a toyhauler but it wasn't set up to strap down 2 bikes. I need to install more tiedown points and wheel chocks and I want it to look clean when the wheel chocks are removed. Maybe threaded inserts for the wheel chocks instead of just wood screws...

I made this for under $50 bucks which includes the cost of chrome secured it to the speedo with some 3m tape what do you think?

I had my rear wheel off for a while during my fuel tank replacement. I 'thought' I knew where the washers on the rear axle went. The larger diameter one goes on the final drive side (left) under the nut. The smaller one has me puzzeled. Both the manual and bikebandit pictures show the smaller...

I bought a Garmin GPS awhile ago and finally got around to buying a mount for the V-Max. I picked one up from http://www.mountguys.com/. So far I am fairly impressed. The GPS unit is held in there quite well, and the reviews on the product that I have been able to find state that there were no...

I am looking for an axle mount license bracket. That the plate will be mounted vertically. Does anyone have one if so where did you get it and how do you like it? :ummm: Pictures would be awesome! Thanks Gannon

I have a Dale Walker Hole-shot 2 that I'm looking for spots to mount the adjustable Box . The only spot I found is under the Passenger seat. Has anyone any suggestions Thanks:bang head:

Not sure if I'm more surprised that they even make this or the fact that they're out of stock . Sure to get attrntion mounted on you handle bar http://www.motosport.com/motorcycle/product/RAM-MOUNTS-HAND-GUN-HOLSTER-HANDLEBAR-MOUNT/?id=125248 Max

Mount Washington is on my short list for destinations this summer. Company is certainly welcome and I will announce a date/time when my vacation is approved. Any advice on must-see or must-do activities in this area would be appreciated. Thanks, Blaine

While looking at solid motor mounts, I have found a lot of people have installed both solid motor mounts and frame braces. Given the solid mounts should turn your engine into a brace can any one explain the benefit of both modifications? Specifically has any one installed the solid mounts...

We are doing a group buy setup for solid motor mounts on the Venturerider.org site. One of our members is getting them for $50 for the set of six. Including shipping to US addresses. Machined from 6061 Aluminum. Same mounts are used on the 1st gen Vmaxs. If anyone is interested let me know...

Here's the latest mod for my Max...scoop mount directional "rings". I came up with this as I was cruising the Custom Dynamics page, looking at all the shiny bits and gadgets, when I saw amber LED strips. I had recently noticed that the small, super short stalk turn signals the P/O of the bike...

I have an 06 Vmax and would like to mount a Givi top case. Givi does not make a mount for the Vmax. Anyone out there that has a solution? I can not go with hard side bags as I have a Kerker pipe that comes up too high. Thankx Glenn

I have seen these things before for the cargo nets on my friends max at work but can't find them anywhere on the interwebs. I don't know what they are called, otherwise I wouldn't be in this situation, but would appreciate if anyone could help me find where I can get them. They mount on the...

I am installing motor back in with new solid motor mounts. I am running into a snag with my rear motor mounts. The stock bolt is bigger od than the id of the solid motor mounts. Do I have the wrong size solid mount or should I just get a smaller od bolt and go all the way through with a washer...

I noticed a question on the yahoo list regarding radiator mounting and now its got me thinking There are four radiator mounts. Two short, two long. As sitting on the bike, do the long mounts go on the left or the right? I'm thinking I may have put one of each on each side.

just about to pick up a few more of the items on the wish list for the bike. got the headlight, knee braces from garrett, new helmet to match bike, braced swingarm, rear hugger, and about to pick up a hyperpro rsc damper. i need to source the mount for the v max and couldnt find any pricing...