rear

I understand that the rear wheel is supposed to be offset.... I have hear amounts like 1cm? On my new '93 the offset appears to be rather large...although I have not measured it yet... The wear on the rear appears to be clearly way off to the side... The wheels on the bike are 18's and...

Looking for either a rear luggage rack or rear luggage mount bracket in order to mount a trunk that I have.... Thanks.

Looking for VMax grab bar. Let me know what you have and your model it is from. PM me with your location and asking price shipped to my door in U.S.

IF it can or is their a replacement to shorten that stem a bit ?

I recently bought V-Max #4 (in my lifetime). Last weekend I discovered some black sealant on the clutch cover just behind the rear brake lever. Apparently the bike had been down before on the right side punching a hole into the clutch cover with the brake lever. The cover itself is discontinued...

I am installing a 17" wheel , a welded up radial. It is pretty heavy. I can't seem to.get the wheel to engage with the pumpkin. Any advice as it's a bitch to move around. I got the axel.to.go thru but won't extend past the pumpkin as the gears won't align.

I MEASURED the rear shock eyelets center to center i get 12.75" bike parked. I found some 11.4" adjustable replacements. So hears the dum question.... Does the 1.25" diffrence in the two shocks translate to the bike being lowered 1.25" in the rear ?

Is the rear banjo 10x1.25 or 10x1?

I installed some new tires and I'm trying to put the wheels back on. Following the instructions in the manual I purchased it tells me to torque down the rear axle before i clamp down the rear axle clamp Bolt. However, when I do that the rear axle spins. When it said to grease the rear axle I...

I am looking to widen my front tire to match my 240 rear tire. Any suggestions would be appreciated.

So what I have been reading is you can go from a stock 150 to a 170 without any modification. I just want to make sure this is correct and is why Im posting. If you move on to a 180 you will have to modify. "washer-spacer or what ever". I finally got rid of the stock Dunlops and went with the...

missing Riders right hand peg and career to frame and rear brake system (caliper hose master and peddle ) all so after full exhaust system oh 1991 V Max but wait for it the hardest part in New Zealand

Doesn't have to be pretty, just straight.

Looking for one of these to replace the sissy bar on my 1985: http://krbishop.com/IMAGES_TO_SHARE/s-l500.jpg

Looking for the plastic piece that fits under the fender that the tag frame attaches to. Shipped to Florida

Although my Vmax runs great, I have noticed that when starting from cold, the rear right cylinder has a slight 'misfire'. After idling for a minute it disappears as soon as it starts to warm up. I have also noticed that when the bike starts to get low on fuel it also starts to miss on the same...

Need the rear grab rail, 1996 Vmax........

Wanted to delete the rear fender and it looks very empty back there. What's the biggest tire I can run on a stock 86 rim and what are good upgrades. Thanks

http://www.mawsolutions.com/html/fournales_shock_absorbers.html.Today i got my hands on some shocks,the magnum ones in the selection.The only thing wrong with them is the chrome is all pitted and full of rusty spots,but that can be sorted.They came off a vmax,am thinking of puting them on...

I'd like to get rid of the rear fender overhang and get the tag up where it looks better, how is this done...a kit, bag of misc parts? Thanks!