shock

Here are some pictures of a local Max owner's new setup that I thought you all would like to see. He never visits this site, even though I tell him to. It is a Mad Max 8 inch stretched swingarm with 300mm rear tire and a single shock setup that he fabbed himself. He originally had the 300mm but...

:bang head: Argh !! Lost a upper rear shock bolt and aluminum washer. Does anybody have these off a parts bike they can sell me? The upper spacer is the thick brushed aluminum one. Thanks hit me up on e-mail [email protected]

Hey, Just saw in Rider mag. that Racetech offers shock springs and valve springs for dual shocks. Not sure if this is new but it could be an option for those out there not interested in Progressives or Works performance. Their site is www.racetech.com

I took the max on about a 500 mile ride this weekend. I have to say it handles like ****, felt loose in turns and unplanted. It has motivated me to get a plan together to fix the handling issues. I see a lot of discussion in regards to progressive rate vs. straight rate springs. I am going to go...

Hey guys, I picked up a set of used 440 progressives this week and the lower caps have been ground down on one side. I called progressive and their going to give me a couple of caps free. ( very nice service from Beth over there) The problem is it requires a tool to compress the spring in...

I HAVE A BRAND NEW SET OF #412 PROGRESSIVE 12:5" REAR SHOCKS ON MY MAX , I WISH I HAD ORDERED THE 13 INCH ! IF ANY BODY'S WISHING THEY HAD 12:5'' OF THE SAME SHOCK BUT HAVE 13'', PM ME IF THEY ARE IN NEW CONDITION & YOU WANT TO TRADE ..:punk:!

Can the stock rear shocks be disassembled in ordered to clean them up?

Found on www.vmaxxers.net, a new development by one of the forum members

So I've been out of the motorcycle loop for 5-6 years and recently got back into the game. I grabbed a shorty lid with my Vmax because I was just going to be puttering around town and the last time I bought a Shoei full face I remember it being kinda pricey. Now, I prefer a full lid, and I'm...

Here are pics of the shocks that my Max came with. Nothing printed or stamped on them - what are they? :ummm: PO said bike was fitted with Progressive front & rear. I don't like these shocks much, mainly because they're 12.5" and I want 13" as these make it impossible to get the bike on...

Found these shocks on the bay. Does the bottom one in the picture look like it's broken, or is it normal for the top cap to be able to be at that angle? :ummm::ummm:

What is the OE rear shock length? 13" or 13.5" Thanks, Daniel

are there any other tools that can be purchased to adjust the preload on the rear shocks without the OE toolkit tool?

Well, I've read though the threads about Forks and I couldn't find an answer to this.:ummm: If a fork is leaking at the dust seal, does that mean the internal seal has gone bad or the dust seal needs replacement? Both my front shocks are still @ 11psi but the oil runs down and drips off one of...

I'm going to retire my Progressive 11.5 rear shocks to improve comfort and ground clearance. I'm considering these Works Pro-racer units or similar spec Wilbers or YSS units. Has anybody used them? What feedback can you offer? Any other recommendations?

Good day to all, I have 2002 vmax and want to adjust my rear shocks. The tool pouch does not have all the parts. What does the tool look like? With riding two up we put on 365 pounds. would a 3 setting be enough on the shocks and damper? Thanks for any help

My owners manual says that a "special" tool in the toolkit is used to adjust the rear shock. My "special tool" is no where to be seen. Can it be raised by using a screwdriver in one of the holes? Paul 02 Vmax

For those not willing to spend mucho bucks on shorter shocks, can look at an alternative method for mere change. Top and bottom are both 1" further apart, giving me a 2" lower rear. Not all that hard to do.

Hey guys, this may be the dumbest thing youve ever heard but i do NOT understand the adjustments on the back shocks. What do they do exactly? I keep mine set on 4 i weigh 270 pounds. Thanks in advance because i know ill get damn good answers!

I have my front end lowered 2".I have a set of 11 1/2" struts for my wheelie bars.I rode with them and I feel that it is too low for on the street.Then I put 13" stock shocks back on and it seems to handle well. Will it be unstable at high speed?I have had it up to 120mph already and it felt...