signal

I am replacing the turn signals on my 1989 Max. The wires on my new signals don't match the ones on the bike. While trying to figure out which wires went where I must have blown something. I have two questions. 1. which wires on the Max are positive, negitave and running light, ( they are blue...

Anyone frustrated with led signal lights, forced to buy special led relay and probably still have TURN indicator lights not working... I have an 97 v-max at my garage with some things to do and owner want to instal set of led signal lights. I've instaled them and OEM signal relay works with all...

My 90 Vmax turn signals never turned off, in fact I hadn't know for awhile that they ever should have, so I always had this habit of forgetting to switch them off. The solution was to wire in a couple of Piezo alarm transducers. I have them mounted in the headlight. Probably possible to run just...

Hi all, I am looking to purchase a new set of saddlebags... however, for most all bags it seems you have to relocate the rear turn signals. Do they make a kit for this? I have searched all over but can't seem to find any. Also, if someone actually have found a set of soft bags without having...

What the hell. This bike breaks more than the old Harley ever did. I just did a valve adjust. Today I took the bike to work, no issues going out. Coming home, I lost everything on the dummy lights panel, tach and temp gauge, both turn signals, horn, and my brake light. Fun ride home. I've lost...

Made an interesting find yesterday...the amber signal light bulbs from an '06 will not work in a '99...the locking posts on the amber bulbs are not opposite each other, as they are with the clear bulbs, therefore the sockets for the amber and clear are configured differently also. So, if...

I obviously put together something wrong...I figured I would ask the experts to shorten my hunt for the fault. The turn signals work opposite of the way they should. Turn left on, right flashes, and turn right on, left flashes. Both front and back. Did I wire the front AND the tail wrong...

The 09 VMAX has the same turn signals as the 08 R1. There are clear turn signal out there. I would like new turn signal but its cheaper to replace the lenses and bulbs. Someone on another site discovered this.

94' vmax. My front turnsignal burned out last week. I replaced it with the wrong bulb on accident. ( Single filiment in dual filiment socket). Rode it for a day. Took te bulb out. First my head light did not work. Now when I turn the key on the only thing that works is the opposite front turn...

Ok - where can i find a set of inexpensive clear turn signal lenses? I just need the lenses i have the bulbs !

Anyone have on of these go bad? I put on some new LED turn signals. Completed installation of rear signals and tested..worked fine. Continued to front two completed and checked ..nada. now nothing works. Following Haynes I narrowed it down to the Signal relay module. Anyone have a good spare one...

Hello again, After having most starting and ignition related sockets apart (for getting the pins checked and treated with corrosion prevent spray) there occurred two very interesting problems. The problems were not so special, but the solution (same for both problems!) sounds almost like...

Don't know if this is the correct category so please move if not. Has anyone put a set of stock front signals on the rear to get running lights in addition to turn signals? If so, did they work properly or were there mods required? (Load equalizer?). Thanks. Don VMOA # 782 1997 Vmax 1968...

Speaking of signal lights... anyone re-locate the front turn signals? I have fitted a new windshield to my Max which fits very nicely after removing the front turn signals. I now need to fashion up a new mount of some kind. I've looked for fork tube clamps, but haven't found any in any of the...