stock

Stock mufflers SOLD Pretty darn nice set of mufflers. If I was going back stock I would keep them. $220.00 shipped in the lower 48 or best offer. 501-520-8211 [email protected] sold

Looking for a decent set of stock front stock header pipes to fit on a 91. Hopefully not too expensive, will need pictures of them :biglaugh: . Thanks

Well, after getting really tired of the ~100 mile range while riding around Fayetteville last month, I finally decided to bite the bullet. Ordered one today. Supposed to be here 11/11. Should be a fun project for the winter. Now I need to rebuild the clutch master and slave on my '86 so...

I have a question about jetting that I can't seem to find the answer for. On a US 49 state model, is the jetting the same from 85-07? This is what I can find on jetting Main Jet 152.5 PAJ1 90 PAJ2 170 Pilot Jet 37.5 Just want to make sure it is the same for all years. I'm trying to put a...

Hi. I have some stange noise comming from..somewhere outside the engine, i think and hope so anyway.! Someone told me that vmax stock pipes are double layer, and in old bikes inner layer can come off/loose and cause "glinging" noise. Is this a fact?? It would be great to have fault in...

Ran my '92 Vmax for the first time, most likely the bikes first time too. Lol. I am 100% stock with a dirty air filter, a weak battery, and the bike had not fully warmed up yet. The dyno confirmed my suspicions about the bike running rich, so I've got a good starting point for the work to come...

Hello to everyone I've all parts to unlock my 100hp vmax but I have a question. Japanese mufflers have smaller holes(21mm) so air flow is lower(I think so). Is there any way to make these mufflers full version mufflers? Or only way is buying 145hp mufflers? This is my exhaust...

I have a question about the stock air box connections, since I am taking off the stage 7 kit. I know the back connection on the air box is to the original crank case vent, but what about the front hole in air box. Does it connect to anything or is it just a drain? I just want to make sure I get...

Hey . i am wanting to re-use my stock grips. The manual says to twist the end cap on the left side grip It wont budge. Any ideas ?

Anybody have a stock GenII Kickstand to sell? I am raising mine back up and am in need of one.

Does anybody know where I can get LED bulbs to replace my stock ones? I just ordered some smoked lenses and do not want to alter the stock look. They need to be amber colored too. Thoughts?

I was told by the previous owner that it had an aftermarket fan installed. It's wired direct to battery with a toggle switch. I found that in the fuse box there's a fan fuse that goes to the thermostat. So I'm guessing the fan is in fact factory but was just wired to a manual switch. Is this...

Hi guys, I'm a new and proud owner of a 2000 vmax, originally imported from Canada, I think... originally had kph speedo not mph. it was supposedly sold to a us customer from the Sue St Marie dealer (still has key ring from that dealer on it). I bought it from the second owner, as far as I can...

Took this short video today, please excuse the dirty wheels....it's dry as a popcorn fart here and we live on a dirt road. :biglaugh: Had the Nelson Rigg tank bag from my Can Am Spyder.....it holds a box of ice cream, what more could I ask? :confused2: If the video stutters on playback...

I need to know the stock length for the clutch line. I want to upgrade my brake and clutch lines, and I can easily measure the brake lines, but the clutch line is routed behind a ton of stuff. Gonna have the shop I go to make up the lines, because the stock straight banjo bolts are a pain when...

Hello all. I am new to the Vmax and have a problem that is stumping me. I bought a 2005 with 7k miles, but the previous owner had removed the plates on the rear of the stock exhaust pipes (ground off the rivets), and drilled the holes out to about 1/2 inch - all five holes. Sounds pretty...

Hi all My 88 is running just fine, I've rebuilt and repainted it, and I'm down to final tweaks now. I was having low end issues but I discovered the PAJ2 were the non stock sizes, that's all taken care of. Which also took me from 25 to 30MPG, still low of course so I've been doing everything...

Does anyone do this kind of work? I replaced my controller last summer, because the old one was only working intermittently. The new one is fine, and I still have the old one. If anyone repairs these, I will be happy to donate my old one for the cause. I'm thinking if someone does this kind of...

Looking to maybe get a 2010 for the right price stock. http://www.ebay.com/itm/121565824579?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Hi All So I've been puzzling over this for ages now. The issue is, the rear right cylinder to left stock muffler pipe, just doesn't fit. It appears to be too short??! more details: the other 3 pipes reach, if a little short in my opinion, although no leaks from any of the 3. the gasket that...