throttle

Anyone have an extra i can buy quick or know where to get them?

The idiot that owned my Max before be put grips on the bike that are too big! So when I pulled them off, he had about a whole role of electical tape wrapped around the handlebar to hold them on. Amazing! Anyway, switching over to the right grips but now it looks like he may have cut the...

My 97 Vmax has just come out of rebuild. Had a lot of trouble with dirt in the carbs, so str4ipped them and used a rebuild kit - now got good smooth tickover, good pickup of power from low revs but.... at anything more than about 1/3 throttle opening the bike dies. Wont pull or accelerate and...

You guys looking for FI, here's a hell of a deal on flea-bay.... :rofl_200: http://cgi.ebay.com/ebaymotors/1985-Yamaha-V-max-VMX-1200-VMX1200-Carb-Throttle-Bodies-/290566482758?pt=Motorcycles_Parts_Accessories&hash=item43a71cab46

Would one of you fine gents please measure the length of the plastic throttle tube, end to end. I think mine has been cut down, if so I need to buy another. Thanks EDIT:I just searched the micro fiche and apparently you cant buy the throttle tube .

so ive torn into my carbs a second time this month trying to repair them. that should be good this time i worked alone. im preparing to install them and i knowticed that there is only one cable coming from the splitter. it is indeed the pull side. it was like this b4. the linkage snaps back just...

So I got my new $154 Vgas throttle cables from Wild Bros and I put them on but I had one hell of a time, it seems like their not long enough, they're real tight I have them adjusted out but still too tight and there's a definite bind of some kind somewhere. I just don't want to break them. Any...

Horrific experience, actually. Witnessed a fellow VMaxer pull up to a stoplight on Saturday, with a Harley joining him in the lane next to him. They're at the front. Long access road...beautiful sunny day. Engines revving (those of us behind the two at the front of the pack, egging them...

How is the cable lubed? Do I take it out of the throttle tube housing OR do I have to take it off the carb OR can I take each cable out of that black box in the middle and lube each end?

I was pulling out of a bike night cruise and SNAP there went the throttle, after checking it out ( at midnight on the side of the road) I see there's a point where it splits into two lines, my question does it come apart there or do I need to buy the whole cable? Any help would be appreciated...

how do you do it? on my fz, i undo the housing and take a syringe filled with wd40. any tips on the vmax would be appreciated. thanks, sid

I need to replace one throttle cable because the plastic elbow broke. Does anyone know where I can find something better? Chrome?

How do I dial in a little more freeplay in the throttle on my 92 max?It just won't go back to idle unless I twist it forward a little more.It's only 200 rpm difference but it drives me nuts.

Anyone know where I can get the manifold gaskets and the throttle cables other than from UFO???

i ordered the python motorsports drag bars and it said they included grips...so i removed my old grips and throttle tube and discarded it...the throttle tube and grip are a complete assembly on the vmax, so i assumed the grips that come from python would include a new tube or a disclaimer saying...

in the manual it shows the california models use a 130 throttle valve (brass butterfly) and the other states use a 125.....whats the difference? what difference would swapping from one to the other have?

I replaced my old worn upper throttle cables with some braided ones I got from Sean. I have a question about it though, and I'm not sure of the answer. There are 2 cables. One of them has a giant long nut that you can use to adjust the slack. I've got mine almost all of the way out and there is...

Today i received some stock grips etc (thanks to Kevin) to replace my munted ones so i replaced one side no problem but when i came to replace the throttle side once i took the end cap off to find that the throttle sleeve had broken away and the grip the sleeve came off in my hand. This may well...

Picked up some used ISO gripsm but they have a GSXR throttle sleeve glued on still. Any thoughts on how to remove it? Here are some pics. The design is not far off from the stock Vmax design - its a difference of a few millimeters. Any chance that I could adjust the throttle cables and just...

So, a guy my wife works with got back from his ride to/from Sturgis, and now has problems with two fingers on his throttle hand. Nerve and vascular damage. Ack. Fingers are discolored and have no feeling. He's getting it treated, but Jesus. My wife, bless her soul, immediately made fun of...