work

I'm just about to give up and say my first Colorado RV trip just wasn't meant to be.. 1991 ck2500 Chevy 4x4. No trailer fuses to worry about. All fuses (one set) are in the dash very far low left and have been checked. When the truck's lights work.. There is power at the 6 pin plug...

By James H. Illies CPM.... 1. Back in 1961 people of color were called 'Negroes', So how can the Obama birth certificate state he is 'African-American' when the term wasn't even used at that time? 2. The birth certificate that the White House released lists Obama's birth as August 4, 1961...

:damn angry:Hi all. I have a 2010 vmax with. On friday i took it into my local dealer to have a oil pump recall performed. 2 miles down the road after leaving the dealership the engine started making some serious squealing noises then actually quit. At first it didnt start then did with the...

Going to Kansas City next week for work. I was debating taking the Max with me. If there are some other members in the KC area that want to get together then that would be a deciding factor. I get there on Monday afternoon and will be there until the middle of the following week. As always, I...

Going to Kansas City next week for work. I was debating taking the Max with me. If there are some other members in the KC area that want to get together then that would be a deciding factor. I get there on Monday afternoon and will be there until the middle of the following week. As always, I...

I have the engine pulled out and fliped over. to just do trans work how far do I have to strip the engine down? Which side cases and other parts do I not have to remove just do do trans work? Thanks..2006 vmax this sucks..lol

Anyone seen or have any experience with this? How does it attach? Easy to remove quickly? http://www.ebay.com/itm/Yamaha-V-Max-VMax-VMX-Sissy-Bar-Backrest-w-Pad-NEW-/130664279515?pt=Motorcycles_Parts_Accessories&hash=item1e6c32addb&vxp=mtr

My odo and speedo work fine but the damn trip meter rolls all three of the mileage indicators when the 1/10 mile indicator cycles. I can get it all to re-set to 0 if I play with it but it still cycles all three. I only average 85-90 miles per tank before my fuel light comes on and I hate...

Anyone have any knowledge whether a 2005 750 GSXR frond can support the Vmax and can it be readily adapted to our head tube bearing cups? I got a line on one reasonable and clean and want to give it a try. Any advice or real world experience is appreciated. Thanks, PATMAX

5.8 magnitude at epicenter in VA. Building shook for about 20-30 secs

Last night when leaving the Substation were at out here in Denver city, Texas near New Mexico my work mate got his van stuck in the sub yard, a frequent occurence in these gravel yards if you're not really gentle with the gas. He 'effin buried it up to the axles. The construction guys were all...

I wanted to do some yard work but they wouldn't let me take one home! Gannon

After many hours of messin with my carbs I think I got it. I'm between 600 and 1200 above sea leavle set my floats at 1.125" needle 2nd from top running 170 main dyno jet synced the carbs and went to test I expected it to run like crap. First gear 5000 rpms hammered it front wheel in the air...

I guess this is what you call irony. A day designed specifically to raise motorcycle awareness; Starts like this. Ends like this. Rear ended less than 1/4 mile from home at 8pm after a 12 hour day in the office. ---------------- I was stopped at a light behind a line of cars. All of the...

My simple Tranny repair is turning into a full blown Mod Monkey freak out. I can't stop myself! With Seans knowledge, advice and coordination and me bolting stuff together my motor is going to 1360,............ doing stroker crank, rods, and 13:1 over bore pistons and biggers cams, valve...

I'm dangerous now, I've figured out how to do videos...:rofl_200: Thursday, I went to the range (See Picture 1) with one of the companies I shoot for. I took along an old A1 Rifle (Second Picture) and my RMW 45 ACP (Third Picture). Did some burst practice (3 Short Videos) with the A1 and some...

custom dynamics flasher installed indicator pulled led signals installed (yellow wire and black wire) running light\signal 2-wire kit installed in the front (chrome glow) everything works great untill i plug the headlamp back in. what the devil is going on?

I see everyone's pictures of your bikes in your nice garages with your big, red, tool boxes and think how awesome it would be to have a dry, lit and even heated place to wrench. I just have a cold, windy, carport with northwest weather and light and it's a PITA sometimes to have to bundle up...

Hi All, I'm in the middle of rebuilding my VMax and have a few questions. I'm looking for some opinions / experiences on the process of powder coating my cases and heads. I'm trying to figure out if this will work and will last. Currently, I've had the cylinders honed and matched to...

This a video of the SST shift light I installed on my 2004, works great! Installation pictures in the electrical section. Available on Ebay in black or silver. http://www.youtube.com/watch?v=4zrPKtG6MlM Bill :biglaugh: