DigitalArts
Well-Known Member
The bike could be made true again with a couple hundred in wiring harnesses from Morley, or you could use it as a clean title parts bike.
Here are the details:
Bike recently had an electrical fire near the ignition, not sure what all was damaged but there is a terrible pic of it below.
Looking for around 2k but if you can buy it before next weekend I'll sell it for 1.5k (cost of rims and exhaust, people...)
https://imgur.com/a/4Edv4
Recently had her dynoed at an event and she pushed 132 HP and 81 tq at the rear wheel. (Seems like BS to me as well, I think it was a happy dyno for happy customers)
- Front Thundercat 17x3.5 rim
- Rear 18 RC rim
- Still have OEM rims w/ new tires
- Saddlebags
- Gel seat covers
- Stage 7 needle
- Morley's muscle kit and the carb rack right off his personal bike
- $450 rear suspension with progressive/preload/rebound
- Dale Walker Holeshot exhaust (complete full exhaust)
- Progressive front suspension w/ gold emulators
- Fork brace
- Corbin seat
- Aftermarket bar
- LED headlight w/ High and Low
- Jetted to spec for mods
- Twist on oil filter adapter
- Oring mod
- Stainless steel brake lines
- Mosfett r/r
- Vboost
- Billet bar end mirrors
- Windscreen
- Possibly notched swingarm
- Other stuff, I'm sure
And recent maintenance includes (also probably forgetting some):
- Valves (back ones)
- Spark plugs
- Valve cover gaskets (rear on, front one is good and have part on hand)
- Two new tires on OEM rims, usable ME880s on radials
- Total strip and reseal/recoat of gas tank with KBS
- Fuel/air filter
- Totally rebuilt carbs (new slides as well, $300+ for them)
- Two oil changes
- Coolant
- Brake fluid
- Fuel lines cleaned
- Wiring gone over
- New mosfett r/r installed
- Charging system
- New 430 CCA sealed battery
- Fork seals
- New grips
- Steering head adjusted
- New oil filter
- Compression checked (perfect)
- LED turn signals (only one installed, resistor needed)
- Also other stuff
Here are the details:
Bike recently had an electrical fire near the ignition, not sure what all was damaged but there is a terrible pic of it below.
Looking for around 2k but if you can buy it before next weekend I'll sell it for 1.5k (cost of rims and exhaust, people...)
https://imgur.com/a/4Edv4
Recently had her dynoed at an event and she pushed 132 HP and 81 tq at the rear wheel. (Seems like BS to me as well, I think it was a happy dyno for happy customers)
- Front Thundercat 17x3.5 rim
- Rear 18 RC rim
- Still have OEM rims w/ new tires
- Saddlebags
- Gel seat covers
- Stage 7 needle
- Morley's muscle kit and the carb rack right off his personal bike
- $450 rear suspension with progressive/preload/rebound
- Dale Walker Holeshot exhaust (complete full exhaust)
- Progressive front suspension w/ gold emulators
- Fork brace
- Corbin seat
- Aftermarket bar
- LED headlight w/ High and Low
- Jetted to spec for mods
- Twist on oil filter adapter
- Oring mod
- Stainless steel brake lines
- Mosfett r/r
- Vboost
- Billet bar end mirrors
- Windscreen
- Possibly notched swingarm
- Other stuff, I'm sure
And recent maintenance includes (also probably forgetting some):
- Valves (back ones)
- Spark plugs
- Valve cover gaskets (rear on, front one is good and have part on hand)
- Two new tires on OEM rims, usable ME880s on radials
- Total strip and reseal/recoat of gas tank with KBS
- Fuel/air filter
- Totally rebuilt carbs (new slides as well, $300+ for them)
- Two oil changes
- Coolant
- Brake fluid
- Fuel lines cleaned
- Wiring gone over
- New mosfett r/r installed
- Charging system
- New 430 CCA sealed battery
- Fork seals
- New grips
- Steering head adjusted
- New oil filter
- Compression checked (perfect)
- LED turn signals (only one installed, resistor needed)
- Also other stuff