99 s7

[RagingMain]

kerker 4-1, main=150, paj2 190, needle is 3 .5 or 4.5 from the blunt end.. **** i cant remember! ill pull 1 tommorow to see.

Hey Bro
Start with this. We are going to make a few changes all at once.
One thing I didnt notice last time was your PAJ2 @190??????
If that is true go back to stock of 170
Set all your floats to 15-16mm, rich to middle of band
Mains 152s to start
Needles at 2nd clip.

You are way rich in the midrange and it looks like it is lean surging on the top end hence your ****** throttle response.

I am off next weekend if you want to come up
Cheers

 

[vmaximum]

THANKS FOR THE REPLY! YA I HAVE TO WORK NEXT WEEKEND TILL TUESDAY, I HAVE WED/THURS OFF. IM BALLS DEEP IN IT NOW! RESET MY FLOAT LEVELS AND IT GOT WORSE. 152'S ROGER, 15-16mm, rich to middle of band DO YOU MEAN AS PER YOUR OTHER POST? BOTTOM OF JETBLOCK TO BEGENNING OF FLOAT?

 

[RagingMain]

THANKS FOR THE REPLY! YA I HAVE TO WORK NEXT WEEKEND TILL TUESDAY, I HAVE WED/THURS OFF. IM BALLS DEEP IN IT NOW! RESET MY FLOAT LEVELS AND IT GOT WORSE. 152'S ROGER, 15-16mm, rich to middle of band DO YOU MEAN AS PER YOUR OTHER POST? BOTTOM OF JETBLOCK TO BEGENNING OF FLOAT?

If you are doing it dry from the bottom of the jet block then adjust for 17mm

 

[vmaximum]

hey, looking for a heads up before the shop throws something at me, they said yesterday that they are having problems getting my bike tunned in the low end. top and mid are perfect and they cant figure out why the low wont dial in. any guess's as to what they are going to say if they cant get it? they sounded frustrated like they were losing all kinds of money for how much time they were spending on it. i dont know exactly what is going on when they trouble shoot, just trying to get a heads up from you guys on here so when they throw something at me i sound like i know what im talking about a little bit. i have had my carbs all apart myself so i know obvious stuff is good, and if there was something broke/ not right they would have already noticed and told me. ? i dont know, just throwing it out there to see if anyone had anything whitty to say. we will see soon if they get it or not. i hope monday.

 

[gamorg02]

i think we'd need more specifics in what they are seeing exactly in the 'lowend'?

 

[vmaximum]

well they said they lost money on this one. bike runs great. how does the data look?

 

[one2dmax]

Would have been better had they done a single gear pull (usually 5th gear). 3rd gear (i'm going to assume from the chart) looks decent and smooth curve.