Axle Nut

[CrackerRican]

Anybody have any ideas what I could do to pretty up rear axle nut, maybe a cover or something

 

[davesax36]

I'd go to a truck stop and see if they have some nut covers with set screws. Or just polish it forever.

 

[jagco1]

I used blue tape and 2 "O" rings and a plug wash and screw...

These are some pictures I took today... When I was out riding...
Look at the rear wheel... it looks real good, I few people stop and look at the bike when I was in Phipps eating. You should see what I did not a good picture of the rear though. "O" to on the lower shock nuts I used some socket holder cups blue....

 

[jfeagins]

Have it ceramic coated. Have them do it thick. Then polish it out with 1600 grit. The cam covers on my gen 2 turned out looking good, and closely resemble aluminum, by using that method.

 

[one2dmax]

https://www.facebook.com/2827024886...82702488678/10150365942463679/?type=3&theater

 

[ImCannibal]

^ Sean has everything, including a bunch of money that used to be mine, but I keep getting sweet parts from him so it's worth it

 

[CrackerRican]

I'd go to a truck stop and see if they have some nut covers with set screws. Or just polish it forever.

Good idea I'll stop after work & check

 

[CrackerRican]

I used blue tape and 2 "O" rings and a plug wash and screw...

These are some pictures I took today... When I was out riding...
Look at the rear wheel... it looks real good, I few people stop and look at the bike when I was in Phipps eating. You should see what I did not a good picture of the rear though. "O" to on the lower shock nuts I used some socket holder cups blue....

Nice

 

[CrackerRican]

Have it ceramic coated. Have them do it thick. Then polish it out with 1600 grit. The cam covers on my gen 2 turned out looking good, and closely resemble aluminum, by using that method.

That's a little more work than I want to do

 

[CrackerRican]

https://www.facebook.com/2827024886...82702488678/10150365942463679/?type=3&theater

Bingo that's what I'm looking for. I was looking on your face book page & I never saw that, you have so many pics I must have missed it. I'll shoot you an email later, I have a few ideas I want to talk about

 

[CrackerRican]

^ Sean has everything, including a bunch of money that used to be mine, but I keep getting sweet parts from him so it's worth it

Ditto, & great customer service too

 

[m-cman]

Harley shops will have them also. Just take nut or measurements to get the right size.

 

[jagco1]

I went through Sean site to, I did not see them. They look cool, Last year i was looking for something to dress up the rear axle. Holley makes a dress up bolt cap kit. At the time could not find anything. So I went with tape if I need to remove the axle again I will re-tape it. Something simple I thought of.... it matches my brake lines and water hoses. I install red vacuum caps on the brake bleeders to help car drivers see me better.

Here's some better pictures.

 

[jagco1]

I went through Sean site to, I did not see them. They look cool, Last year i was looking for something to dress up the rear axle. Holley makes a dress up bolt cap kit. At the time could not find anything. So I went with tape if I need to remove the axle again I will re-tape it. Something simple I thought of.... it matches my brake lines and water hoses. I install red vacuum caps on the brake bleeders to help car drivers see me better.

Here's some better pictures.

Sorry for the 2nd post been drinking sherry cooking oil man it's sweet good.