Belly Pan Advice......

[jims-max]

I'm thinking about a belly pan from this guy.....

http://www.fatmax.com/vmax/vmax.htm#bellypan

Any experiences.. good or bad?? anyone recommend of any other manufacturers??

It appears I can keep my engine guards.

 

[dannymax]

I've had a couple of those and lots of my riding buddies do also. Always thought it was about the best looking one out there.

All he had back then was the one without the cutout for the crash bars and we cut holes with a Dremel to accomodate for them.

They're good quality, thick fiberglass, a good unit IMO. :thumbs up:

 

[jims-max]

Do you loose ground clearance with a belly pan? or does it just appear that way?

 

[one2dmax]

Not much usually - looks can be deceiving.

 

[shicks16]

I have this one as well. I bottomed out on the first trip out and had to grind out the holes on the brackets to get it up further. Keep in kind though that my bike is lowered a bit.

 

[Rollie]

If your bike is lowered you must be mindful of speed bumps , trailer ramp pivot points , etc. or you will be buying another pan .

 

[jims-max]

If your bike is lowered you must be mindful of speed bumps , trailer ramp pivot points , etc. or you will be buying another pan .

I was worried about this... my bike is not lowered, and I doubt I will lower it. is there any clearance issue's with the stock height?