gunrunner Well-Known Member Joined Dec 2, 2007 Messages 1,502 Reaction score 3 Location Gladstone Wairarapa , New Zealand Jun 13, 2009 #1 Have just fired up my Max to balance the carbs to find the choke not staying on and cuts the revs right down to 400 rpms . I noticed there is 2 screws 1 at the bottom and 1 at the back/ front of the bike . Do i need to tighten any of these ? Attachments vmax june09.jpg 129.1 KB
Have just fired up my Max to balance the carbs to find the choke not staying on and cuts the revs right down to 400 rpms . I noticed there is 2 screws 1 at the bottom and 1 at the back/ front of the bike . Do i need to tighten any of these ?
maleko89 Well-Known Member Staff member Moderator Joined Mar 30, 2006 Messages 6,965 Reaction score 398 Location Gretna, NE Jun 13, 2009 #2 Tighten the one at 9:00 in your picture. Use a small ratchet with flat bit.
G goatman Well-Known Member Joined Jan 19, 2009 Messages 88 Reaction score 0 Location Missouri Jun 15, 2009 #3 Thanks for that, I've got the same issue.unk:
unk:
