A friend of mine has installed a brembo master cylinder on his vmax clutch system. It worked fine untill one day no pressure was on his lever. We did all the things we could do to bleed the system( gravity, syringe) as we were trying to find out what was the problem. We bumped into it. When we took the panjo bolt off the master cylinder and opened the resevoir cup we pressed many time the lever and the fluid from the reservoir could go into the master cylinder. We checked the hose that connects the reservoir to the m/c clean. When we started to open the m/c as we tryied to took out the piston from the place it was , after moving the piston very slightly to take it out. Fluid started going in the m/c. Seems like the piston didnt go all the way out so fluid could go in the m/c .what should be the problem??? Any ideas????
