Connecting new speedometer

[Robby Tweak]

Hello,
I just bought a new speedometer for my 1997 Vmax.
The original speedometer cable fits nice. ( The one from the frontwheel) Now i have to connect the wires. The original wires are black, blue and white.
I suppose minus, positive and ?
I only need to read the speed from this speedometer and have a backlight and i am not using the tachometer on this new meter for now. The speed will be displayed digital.
Can somebody help me?. I posted the electrical scheme from the new speedometer. I can skip a lot because i am not using the other functions.
Thanks a lot.
Greetings Robby from Holland.

 

[MaxMidnight]

The blue wire on the OE loom is the feed for the illumination and black is earth. The white/ green is for the reed switch with is part of the signal cancelling function (which will no longer work.)

 

[Robby Tweak]

The blue wire on the OE loom is the feed for the illumination and black is earth. The white/ green is for the reed switch with is part of the signal cancelling function (which will no longer work.)

Thank you very much.
Is it a problem that the signal cancelling function no longer works?
I just found a how to on you tube fot this specific speedometer. It is a speedometer that a lot of people use. Oke, it is from China but worth a try. I wonder if i have to put on a magnet with cable for the speedometer because this new speedometer also have the "old" connection where the oem cable goes in.
Thanks and have a nice day.
Greetings Robby

 

[Jstets]

Thank you very much.
Is it a problem that the signal cancelling function no longer works?
I just found a how to on you tube fot this specific speedometer. It is a speedometer that a lot of people use. Oke, it is from China but worth a try. I wonder if i have to put on a magnet with cable for the speedometer because this new speedometer also have the "old" connection where the oem cable goes in.
Thanks and have a nice day.
Greetings Robby

I use the same speedometer on my 2005, I put 3 small magnets equally spaced in the allen heads of the brake roatar bolts, then mounted the sensor off the caliper bolt with the supplied bracket.

 

[brian hicks]

The speed cancelling function only works after 10 seconds and only if the bike is moving. Personally I have never found it much use because it's quite obvious when the indicators are on due to the console light. 10 seconds is a long time to be riding with an indicator that should have been cancelled.

 

[Robby Tweak]

The speed cancelling function only works after 10 seconds and only if the bike is moving. Personally I have never found it much use because it's quite obvious when the indicators are on due to the console light. 10 seconds is a long time to be riding with an indicator that should have been cancelled.

Thanks for the information

 

[Robby Tweak]

I use the same speedometer on my 2005, I put 3 small magnets equally spaced in the allen heads of the brake roatar bolts, then mounted the sensor off the caliper bolt with the supplied bracket.

Thanks. I will figure it out later. Yesterday i saw a gps speedometer with just and only the reading of the speed and a day trip function. I gonna try that one first.