Who's good at this? I thought I was being that I've been doing it for 16 years now.... That being said, My LED headlight came in the mail and I decided to install the smart switch and a SAE hook-up since I was gonna have it all apart anyway hiding wires. Got it all tucked away and before I completely put everything back together gave the key a test turn to make sure everything was working right still, PSSSFFFTTTTT. The 30A fuse toasted. So run switch OFF and key to ON the main fuse blows.:ummm:
Whatever I installed did't cause a short because the smart switch is fused separately. None of the other fuses blew.
Put meter between bike side of 30A fuse block and frame and have continuity with key ON
Disconnected ignition switch, lost continuity
Disconnected speedo, lost continuity
Hooked everything back up EXCEPT speedo, turn key ON, everything works.
How do you take the speedo apart? I think there's some corrosion going on in there somewhere OR am I reading through the lamps... MY HEAD HURTS!
Whatever I installed did't cause a short because the smart switch is fused separately. None of the other fuses blew.
Put meter between bike side of 30A fuse block and frame and have continuity with key ON
Disconnected ignition switch, lost continuity
Disconnected speedo, lost continuity
Hooked everything back up EXCEPT speedo, turn key ON, everything works.
How do you take the speedo apart? I think there's some corrosion going on in there somewhere OR am I reading through the lamps... MY HEAD HURTS!