Parts Wanted Final Drive Shaft Holder tool

[Ladha1990]

Merry Christmas everyone,

Looking to source (buy or borrow) the special tool (YM-01229) to remove final drive nut. Anyone have any leads on where I can purchase this, cant seem to find anything online. Thanks!!!

 

[[email protected]]

Merry Christmas everyone,

Looking to source (buy or borrow) the special tool (YM-01229) to remove final drive nut. Anyone have any leads on where I can purchase this, cant seem to find anything online. Thanks!!!

https://www.vmaxforum.net/threads/final-drive-disassembly-shadetree-style.22688/

Check this thread for some info on how to take the nut off without any special tools

 

[gentsvmax]

Amazon of course $295, but ill bet theres a way to handle this without the "special" tool.

 

[Stephan]

I also did this to get my final drive powder coated. I made my own tool to remove the bearing retainer using a piece of mild steel 6 mm thick and cutting it to clear the shoulder of the final drive casting, and the central thread as you can see here in the picture. It engages with just two of the four slots in the retainer which works just fine. The tool can then be turned clockwise (left hand thread) using a pair of adjustable wrenches. The nut which goes on the thread shown in picture 1 can be removed by using some soft metal to lock the two gears as shown in picture 2.