S Sharky Well-Known Member Joined Jun 19, 2012 Messages 471 Reaction score 0 Location Brisbane, AUSTRALIA Mar 16, 2016 #1 Instead of using a stock max frame I'll be using an xvz1300 royal star frame Attachments Screenshot_2016-03-15-21-38-05-1.jpg 39.9 KB Screenshot_2016-03-15-21-39-15.jpg 47.6 KB Screenshot_2016-03-15-20-49-07-1.jpg 33 KB Screenshot_2016-03-15-21-10-27.jpg 37.3 KB
liptoss Well-Known Member Joined May 8, 2014 Messages 327 Reaction score 5 Location Toronto Mar 16, 2016 #2 Looks wicked
Traumahawk Well-Known Member Supporting Member Joined Dec 12, 2011 Messages 8,260 Reaction score 518 Location Lawton, OK Mar 16, 2016 #3 Well that will definitely give it that low and mean kind of look.
sdt354 Well-Known Member Joined Aug 8, 2008 Messages 6,111 Reaction score 385 Location Bristol County, Massachusetts Mar 16, 2016 #4 I like the look. Makes for a sweet machine.
Rollie Well-Known Member Joined Jul 7, 2008 Messages 3,423 Reaction score 144 Location Monticello , Georgia Mar 16, 2016 #5 Are you planning a VMax motor for the Royla Star frame ? I don't think it's just a bolt - in swap . Attachments # 2 Group Chip 1147.jpg 94.5 KB
blaxmax Well-Known Member Joined Sep 6, 2014 Messages 2,863 Reaction score 4 Location palm springs ca Mar 16, 2016 #6 I think it's going to look great.
S Sharky Well-Known Member Joined Jun 19, 2012 Messages 471 Reaction score 0 Location Brisbane, AUSTRALIA Mar 16, 2016 #7 Bugger...that was close. The frame needs some big mods to take max motor...
Shredder Well-Known Member Joined Feb 5, 2016 Messages 197 Reaction score 0 Location Dorr MI Mar 16, 2016 #8 Thatll be bitchin
S Sharky Well-Known Member Joined Jun 19, 2012 Messages 471 Reaction score 0 Location Brisbane, AUSTRALIA Mar 16, 2016 #9 Turns out the motor fits but the carbies wont. Due to cyl head differences and the vboost unit the frame rails get in the way.
Turns out the motor fits but the carbies wont. Due to cyl head differences and the vboost unit the frame rails get in the way.
S Sharky Well-Known Member Joined Jun 19, 2012 Messages 471 Reaction score 0 Location Brisbane, AUSTRALIA Mar 16, 2016 #10 This shows the problem.... Attachments 20160317_070824-1.jpg 77 KB
Traumahawk Well-Known Member Supporting Member Joined Dec 12, 2011 Messages 8,260 Reaction score 518 Location Lawton, OK Mar 16, 2016 #11 So what are the options then?