GreenfieldMad
Active Member
Heu guys just getting rear wheel put back together and im wondering what the torque spec is for the rear brake rotor ?
Help! 2001 rear brake rotor torque??
- Thread starter GreenfieldMad
- Start date
Help Support VMAX Forum:
GreenfieldMad
Active Member
Thats looking like 14 footpounds ? Does tht sound right
Yes 14 lbft.
As a sanity check, these appear to be M8 bolts; the max torque for M8 steel bolts varies from 21.3 to 36.6 lbft depending on the grade (8.8 to 12.9).
So 14 is below the minimum for the "softest" grade of steel.
As a sanity check, these appear to be M8 bolts; the max torque for M8 steel bolts varies from 21.3 to 36.6 lbft depending on the grade (8.8 to 12.9).
So 14 is below the minimum for the "softest" grade of steel.
About 30 sec's to find the 14'lb tq. spec. online, buuuut!
As has been and will be mentioned you need a FACTORY service manual.
Owning the bike you'll be able to take it apart and put it back together blindfolded but you will need to reference tech info.
Even blindfolded someone can read it to you.
As has been and will be mentioned you need a FACTORY service manual.
Owning the bike you'll be able to take it apart and put it back together blindfolded but you will need to reference tech info.
Even blindfolded someone can read it to you.
