i PLEASE HELP FIGURE OUT WHAT THIS IS !

[COP RUNNER]

i ... THIS THING IS AT MY LOCAL NAPA AUTO PARTS STORE THAT I DEAL WITH , THEY HAVE HAD IT FOR YEARS , IT WAS ON TOP OF A CRATE DELIVERED TO THEM YEARS AGO ! ... NOBODY EVER CALLED AND ASKED ABOUT IT , AND THEY HAVE NO IDEA WHAT IT IS ! ... I TOLD THEM THAT I'M ON THIS MOTORCYCLE FORUM WITH GUY'S FROM ALL OVER THE WORLD , AND IF ANYONE CAN FIGURE IT OUT , YOU GUY'S CAN ! unk: ... I'M GOING TO POST ABOUT 10 PICTURES ,, .IT IS SOME TYPE OF FITTING , IT'S 4'' WIDE , 8'' HIGH WEIGHTS ABOUT 15 LBS , IT IS SOLID STAINLESS STEEL , BOTH ENDS LOOK LIKE THEY ARE MACHINED FOR AN "O" RING , BUT ONE END BOLTS ONTO SOMETHING , AND THE OTHER END LOOKS LIKE A HOSE COULD SLIP OVER IT AND BE CLAMPED , AND THE HOLE IN THE SIDE I'M NOT SURE ! :confused2:

 

[HyperPete]

Knutson valve?

 

[poppop]

ele-if-i-know?Love the lil dragster.Lil guy is gonna fall over.Youre a great pop.

 

[Lew L]

Blinker fluid control valve??

 

[The Beekeeper]

Looks like a custom made piece to me, didn't see any numbers stamped into it, I would guess low pressure or suction side fluid delivery part....................Tom.

 

[wayne z]

Coolant thermostat housing?

 

[Itgoes]

I would say it's most likely not an automobile part. Not much stuff on a car made of stainless steel except maybe something brake related.

Looks a lot like a "sanitary fitting"........ although I have know idea what kind.:confused2:

 

[adambweird]

Dont know what it is, but ill weld it to something, lol.

 

[Fire-medic]

I think it's some sort of coolant valve/fitting for a marine application, perhaps an exhaust fixture?

 

[gentsvmax]

That is a rikapiculator valve spring compressor/extractor.
By the orientation of the milling at the base, the one pictured
is a left hand unit.
Reference the inner bore for upper or lower seat adaptation
locator pins.

 

[one2dmax]

Looks like a turbo external wastegate kit (up-pipe design).
Maybe something like this:
http://www.ctamotorsports.com/neon_images/atpturbop8.jpg

 

[wildweasel_pt]

That is a high tech paper weight...

 

[Biker Dash]

Blinker fluid control valve??

Considering I found this in the store the other day, you may be right...

 

[COP RUNNER]

Looks like a custom made piece to me, didn't see any numbers stamped into it, I would guess low pressure or suction side fluid delivery part....................Tom.

i ... NOPE , NO NUMBERS OR MARKINGS OF ANY KIND ! :confused2:

 

[COP RUNNER]

Dont know what it is, but ill weld it to something, lol.

i .. :rofl_200::rofl_200::rofl_200:

 

[COP RUNNER]

I would say it's most likely not an automobile part. Not much stuff on a car made of stainless steel except maybe something brake related.

Looks a lot like a "sanitary fitting"........ although I have know idea what kind.:confused2:

ii .. IT LOOKS VERY EXPENSIVE , I WAS WONDERING IF THE WHOLE IN THE SIDE COULD BE FOR A SIGHT GLASS , SO YOU COULD SEE THE FLOW/BUBBLES ? :confused2: I KNOW THAT'S NOT MUCH HELP ! :confused2:

 

[COP RUNNER]

That is a rikapiculator valve spring compressor/extractor.
By the orientation of the milling at the base, the one pictured
is a left hand unit.
Reference the inner bore for upper or lower seat adaptation
locator pins.

:rofl_200::rofl_200::rofl_200:

 

[COP RUNNER]

I think it's some sort of coolant valve/fitting for a marine application, perhaps an exhaust fixture?

i IT COULD BE FOR A YACHT OR SOMETHING BOAT/SHIP RELATED :confused2:

 

[jfeagins]

Top secret, internal component of a geothermal nuclear device. Part of the trigger mechanism.

 

[schudaddie]

I say a high speed muffler bearing or a discombobulated fratistat. unk:
later, bill