installing walker exhaust...
- Thread starter gamorg02
- Start date
-
- Tags
- exhaust installing walker
Help Support VMAX Forum:
Jack Butler
Well-Known Member
Sitting on the bike, the S is rear left , the L is rear right.
vmaxride06
Well-Known Member
I will take a few Pictures for you in the morning.
chris, thanks man jack answered the question. only way they woulda went on anyways to clear the shaft drive
didn't realize walkers switch the rear headers (left stays with left, right with right) from stock
didn't realize walkers switch the rear headers (left stays with left, right with right) from stock
so new question
is it normal for a little bit (only had the bike on for about 5 minutes in the carport, until it reached op temperature) for there to be a bit of smoke with the new ceramic and gaskets?
also how do i tell if there's any exhaust leaks?
maybe i just need to run it a bit? there was a slight smell to the smoke too, a little 'burny' ish i would call it.
is it normal for a little bit (only had the bike on for about 5 minutes in the carport, until it reached op temperature) for there to be a bit of smoke with the new ceramic and gaskets?
also how do i tell if there's any exhaust leaks?
maybe i just need to run it a bit? there was a slight smell to the smoke too, a little 'burny' ish i would call it.
ok so i called up sean.
he put my fears to rest.
ok for a little bit of smoke, could be anything, coating residue, oil from hands. it gets a little better each time
my front left header was touching one of the fins on the oil pan that kind of 'protects' the oil sensor unit. he said thats fine as well..
no leaks either (i think)!
he put my fears to rest.
ok for a little bit of smoke, could be anything, coating residue, oil from hands. it gets a little better each time
my front left header was touching one of the fins on the oil pan that kind of 'protects' the oil sensor unit. he said thats fine as well..
no leaks either (i think)!
![Bovemanx Motorcycle Phone Mount Holder, [150mph Wind Anti-Shake][7.2inch Big Phone Friendly] Bike Phone Holder, Motorcycle Handlebar Cell Phone Clamp, Compatible with iPhone 16 Pro Max Smartphones](https://m.media-amazon.com/images/I/51F+1sontPL._SL500_.jpg)
Redbone
Well-Known Member
I saw your pics and it looks great Garrett! I really like the black exhaust make the bike so sinister looking. I know you will enjoy the sound as you run it up through the vboost! Both your and Danny's look awesome, hopefully we'll be comparing exhaust sounds next spring at while enjoying some delicious brownies!
unk:
unk:
ghostntheshell
Well-Known Member
Last edited:
Redbone
Well-Known Member
Follow this link: http://www.vmaxforum.net/showthread.php?t=8470 Look for post #262.
took a ride today. no ticking or clicking or any other noises. keep checking the nuts there and each time they seem to hold better. had a small leak where the right rear header meets the Y (not the exhaust port) talked to sean briefly and he recommended a bit of silicone. i just put a dab as i think it was coming out of one of the slots and that seems to have fixed it! aside from that have a slight leak on each muffler where it meets the pipes where the clamp doesn't touch. i will silicone later again, but for now i think its fine. as long as no exhaust is leaking until it gets to the pipes... as for tomorrow!
JET KIT INSTALL TIME. once thats in, i will deem it appropriate to take legit pictures, not these half assed ones i put up!
actually now that the pipes are cool i'm going to put a dab more of it on that problem area and let it dry overnight...
JET KIT INSTALL TIME. once thats in, i will deem it appropriate to take legit pictures, not these half assed ones i put up!
actually now that the pipes are cool i'm going to put a dab more of it on that problem area and let it dry overnight...
