Jetting help

[Samfish]

I looked through the different sections to find a specific jetting combo for my particular setup and didn't really see one that fit exactly. Just recently got a Mark's 4 into 2 and a Muscle Jet kit. Otherwise the bike is stock. What carb settings would be appropriate for the bike?
I live in Florida so the elevation would be close to zero. Does anyone else have this setup in Florida or nearby? My mechanic would appreciate some guidance. Thx!!

 

[NHVmaxpower]

Mains 147-150 af/screws 2 1/2-3 turns

 

[sdt354]

I looked through the different sections to find a specific jetting combo for my particular setup and didn't really see one that fit exactly. Just recently got a Mark's 4 into 2 and a Muscle Jet kit. Otherwise the bike is stock. What carb settings would be appropriate for the bike?
I live in Florida so the elevation would be close to zero. Does anyone else have this setup in Florida or nearby? My mechanic would appreciate some guidance. Thx!!

http://factorypro.com/tech/carbtune,CV,high_rpm_engines.html
Are you using Sean's kit? If so, 155 mains to start, clip position 2-3 for starters.

 

[tugla]

+1

And Nice link Steve...

 

[veebooster]

http://factorypro.com/tech/carbtune,CV,high_rpm_engines.html
Are you using Sean's kit? If so, 155 mains to start, clip position 2-3 for starters.

If you're using stock needles - start at 157.5 mikuni.

Dale

 

[NHVmaxpower]

http://factorypro.com/tech/carbtune,CV,high_rpm_engines.html
Are you using Sean's kit? If so, 155 mains to start, clip position 2-3 for starters.

Oh **** my bad I DID NOT see you had a morleys kit sorry I thaught was just marks pipes . Im taken lots of meds for my back maybe I shouldn't post or art least read 10 times haha

 

[Samfish]

Thanks for the input. I'll let you know how it goes. It's been in the shop for almost a month now. Apparently, there are a lot of worn out parts to the carb that need to be replaced... Should have totally rebuilt carbs by the time this process is over!