Kerker parts?

[kozy]

I bought a Kerker 4-1 from a guy on Ebay. I got the pipe and the clamp that keeps the can onto the headers.......I know I'm missing other parts though. Does anyone happen to have an install sheet or something on the Kerker that lists all the parts that should come with it? I don't know what all I'm missing.

 

[one2dmax]

The kerker consists of the main tubes from the front, two rear tubes, one 2.5" "S" pipe and bracket that bolts to it and the stock exhast mounting location, and then can and baffle. There are no clamps for the rear downtubes. There is a clamp for the "S" pipe and the Muffler. None of those indvidual pipes are cheap but I can get any of them.

Sean Morley

 

[kozy]

Holy crap....I think I'm missing a lot more than I thought! Here's 2 pictures of everything that I've got for it (minus the baffle)

 

[red98vmax]

Looks like everything to me. You use the bolts you have to bolt the pipes to the engine and that little bracket goes on the rear foot peg support bracket. So you are all set.

Steve

 

[maxcruiser]

+1 to red98vmax - everything is there that you need.

Mike

 

[kozy]

Where exactly does the clamp go though? Sean said that it is "for the s-pipe and muffler."
I'm kinda cornfused.....where is that exactly?

 

[red98vmax]

It clamps around the base of the black muffler where it goes over the silver pipe. Covers up the little screw. Enjoy the setup!

Steve

 

[Stingray230sx]

ok im gonna reopen this thread , i see where we dont get any clamps for the two rear cylinder down tubes but ive had mine off twice now and tried every high temp silicon type sealant i can find or buy and they still leak a bit....im gonna look into a couple of clamps to help me seal these, anybody else ever have any trouble with this???? im tired of riding to the local bike nite stinking like exhaust!!!!!!

if not then its coming off and something else is going on there....i really like the look of the stainless hindle (if i can find one)


doug

 

[Buster Hymen]

ok im gonna reopen this thread , i see where we dont get any clamps for the two rear cylinder down tubes but ive had mine off twice now and tried every high temp silicon type sealant i can find or buy and they still leak a bit....im gonna look into a couple of clamps to help me seal these, anybody else ever have any trouble with this???? im tired of riding to the local bike nite stinking like exhaust!!!!!!

if not then its coming off and something else is going on there....i really like the look of the stainless hindle (if i can find one)


doug

When my back ones leaked it was because part of the center stand tab wasn't cut off and wasn't letting the pipes go tight together.

 

[lankeeyankee]

Mine started leaking about 3 years ago. The one downpipe even split a little..I use the red hi temp silicone.. let it set for about 30 mins and then insert the pipes.