Zippo, The wiring is super easy. I used a T-Tap to tap into the wire that comes out of the headlight fuse (little black box under front seat). I came out of the T-tap with a short piece of wire and into a fuse holder and fuse from the auto parts store, and then ran the wire to a switch that I installed in the plastic above the left scoop. Come out of the switch and run to all your LED's. Added ground wires for all. Use zip ties to secure the wires along the frame rails. All of the lights would be pretty easy to replace or remove if needed. I should have documented the whole thing with pics, but when I was doing it, I was in "trial and error" mode. If I have the thing apart again, I will take some pics of the wiring and placement.
