Help Support VMAX Forum:
Centerstand will take a lot of muscle to get the bike on it. At my advanced age, can't do it without hurting something.. :biglaugh: I ride the back tire on to a 2x4 and carefully dismount and put on stand.
Side stand may or may not be ok. Mine is ok with 1 inch drop in front only. I have had to mod bikes before and used my oxy/acetylene torch to heat the sidestand on the bike and gradually tilt the bike to the desired lean angle. Then had sidestand powdercoated as this ruins the paint. Other options cost much more money. Have also modified centerstands but much more difficult. Requires cutting and re-welding and careful measurements. Also fixes to make sure the centerstand doesn't hit something in the up position, like the muffler or something damageable. I have added stainless steel brackets to move the rubber bumper the stand hits when up.
Side stand may or may not be ok. Mine is ok with 1 inch drop in front only. I have had to mod bikes before and used my oxy/acetylene torch to heat the sidestand on the bike and gradually tilt the bike to the desired lean angle. Then had sidestand powdercoated as this ruins the paint. Other options cost much more money. Have also modified centerstands but much more difficult. Requires cutting and re-welding and careful measurements. Also fixes to make sure the centerstand doesn't hit something in the up position, like the muffler or something damageable. I have added stainless steel brackets to move the rubber bumper the stand hits when up.
I don't actually know how much mine is lowered overall. More than an inch probably, but I had to use a shorter stand. It was too upright for me to be comfortable with it. It felt like a strong breeze might blow it over.
Best option (for me) was to get one from Captain Kyle. He can send you one that is shortened and powdercoated. Last I heard he had a jig made up, and was getting them welded properly. Mine looks original.
Best option (for me) was to get one from Captain Kyle. He can send you one that is shortened and powdercoated. Last I heard he had a jig made up, and was getting them welded properly. Mine looks original.
Both of mine are lowered 1" at the front only. Sidestands are fine. As Dan-o mentioned the centerstand is a different story for us older guys. Strafer fell yesterday when I tried to get her on the centerstand and lost balance. Tore my left leg up bad on something trying to stop the fall.:bang head: No damage to the bike as it fell on / into some of the stuff in my garage and not all the way down.
Sonoran6
Well-Known Member
I lowered mine 1" in the front and the side stand works fine. Never had a center stand tho
There is an eBay vendor (billetcycles) that just added adjustable sidestands in natural or black finish for $78.96 including shipping. Will cover all lowering heights. Good if may change mind on heights later on.
![Bovemanx Motorcycle Phone Mount Holder, [150mph Wind Anti-Shake][7.2inch Big Phone Friendly] Bike Phone Holder, Motorcycle Handlebar Cell Phone Clamp, Compatible with iPhone 16 Pro Max Smartphones](https://m.media-amazon.com/images/I/51F+1sontPL._SL500_.jpg)
one2dmax
Well-Known Member
Good price on a custom stand. We sell our modified stands for $50 shipped and exchanged.
Redbone
Well-Known Member
KJShover
Proud Vmax lover
Don't need you getting beat up, hope you heal up quick :stretche:
lawman504
Well-Known Member
I will be getting progressive shocks from Sean soon. What are the advantages and disadvantages of lowering an inch? And what does everyone prefer? :beer::beer:
Sent from my SPH-D710 using Tapatalk 2
Sent from my SPH-D710 using Tapatalk 2
1st Shirt Maxer
Well-Known Member
I lowered mine an inch in the front using progressive, also replaced rear shocks with 440's from Sean at a great price. I'm a bit heartier at 205 and 5'10" and my setup is perfect. I also snugged the front triple tree nut after reading about the wobble and have had no issues. It takes corners great with the tires I have and I'm happy. I used synthetic power steering fluid in my front forks and I like the results and it was a lot cheaper.
I love it....I dropped the front down an inch, and put on preload adjusters to take up about 1/2 an inch of preload...feels like a whole new bike, and to me this is what the factory should've done from the beginning.
fullhouse
Well-Known Member
Will this lower the ass end if the max? How much by? 
one2dmax
Well-Known Member
Stock is 13" Length. I don't normally suggest more then 1.5" (11.5") shocks. We have used as short as a 10.5" shock but that's got very little travel and for smaller folks. My regular every day price is better then that by the way.
fullhouse
Well-Known Member
If you can better the price ill buy from you mate 
one2dmax
Well-Known Member
My current pricing (though I know will be going up soon) on the progressives is on our website here:
http://www.morleysmuscle.com/muscle-bikes/vmax/many-others
The 412's like you posted link to are $215 plus shipping ($20 if in the U.S.). If not in the U.S. (which I see you aren't). Then you have the shipping to me ($20) and the reshipping back out to you. So, works out a similar price at least by the time you get them from me and not sure if we can ship cheaper? We ship USPS.
http://www.morleysmuscle.com/muscle-bikes/vmax/many-others
The 412's like you posted link to are $215 plus shipping ($20 if in the U.S.). If not in the U.S. (which I see you aren't). Then you have the shipping to me ($20) and the reshipping back out to you. So, works out a similar price at least by the time you get them from me and not sure if we can ship cheaper? We ship USPS.
Similar threads
