AndrewT
New Member
- VMax Year
- 1996
Hi,
I an in Sydney Australia and am a Mechanical Engineer with a trade background.
I have had a black 96 VMax since 2014 and am the 3rd owner.
A few upgrades done before me are:
Heads shaved 12:1 compression.
Ported
Mild cams
Heavy duty clutch spring
Stiffer progressive from fork springs.
4 into 4 stainless custom stainless steel drag pipes. I have replaced these with modified stock one's.
Dynojet stage 1
K&N airfilter
Y off the airbox
Running 98 petrol only.
Sissy bar back rest and custom carry rack.
Genuine fly screen
It had a steering damper at some stage but it was missing when I bought it.
I have done the following to it since:
heavy duty rectifier
heavy duty starter clutch 6 lobe.
Heavy duty AMG sealed battery.
Heavy duty 4 pole starter motor.
Heavy duty alernator
Heavy duty radiator
Heavy duty starting solenoid 130 Amp from an Aprilia RSV.
Battery current circuit breaker and isolation.
Heavy starter circuitry
Led light globes in standard fittings for indicators and brake/tail light.
HID headlight
Giva larger flyscreen windshield
Lower faring with 2 LED daytime running lights
AM seat covers
rear seat section hinged for easy access.
Leather hard panniers
9 channel data logger. Fitted telemetry:
AF ratio gauge
Vacuum boost and RPM gauge
digital speed sensor
digital tacho sensor
TPS
Knock sensor on front left cylinder
Temperature sensor
Standard exhaust mods
Exhaust tips
Wave brake rotors front and rear with standard pads
Underslung XJ1300 rear brake assembly.
Silicon radiator hoses
Front forks rebuilt, straightened re-chromed and ground to size new seals and wippers. Gatters fitted to protect the exposed chrome on the forks.
Carbon ignition leads.
That about it.
Many mods to do:
Ignitech race 3 ignition and a bunch of new upgrades.
Some exhaust mods to the standard headers and mid chamber to improve flow and reduce back pressure.
Mods to the air intake with pre-separators ram air boost and cooling.
I an in Sydney Australia and am a Mechanical Engineer with a trade background.
I have had a black 96 VMax since 2014 and am the 3rd owner.
A few upgrades done before me are:
Heads shaved 12:1 compression.
Ported
Mild cams
Heavy duty clutch spring
Stiffer progressive from fork springs.
4 into 4 stainless custom stainless steel drag pipes. I have replaced these with modified stock one's.
Dynojet stage 1
K&N airfilter
Y off the airbox
Running 98 petrol only.
Sissy bar back rest and custom carry rack.
Genuine fly screen
It had a steering damper at some stage but it was missing when I bought it.
I have done the following to it since:
heavy duty rectifier
heavy duty starter clutch 6 lobe.
Heavy duty AMG sealed battery.
Heavy duty 4 pole starter motor.
Heavy duty alernator
Heavy duty radiator
Heavy duty starting solenoid 130 Amp from an Aprilia RSV.
Battery current circuit breaker and isolation.
Heavy starter circuitry
Led light globes in standard fittings for indicators and brake/tail light.
HID headlight
Giva larger flyscreen windshield
Lower faring with 2 LED daytime running lights
AM seat covers
rear seat section hinged for easy access.
Leather hard panniers
9 channel data logger. Fitted telemetry:
AF ratio gauge
Vacuum boost and RPM gauge
digital speed sensor
digital tacho sensor
TPS
Knock sensor on front left cylinder
Temperature sensor
Standard exhaust mods
Exhaust tips
Wave brake rotors front and rear with standard pads
Underslung XJ1300 rear brake assembly.
Silicon radiator hoses
Front forks rebuilt, straightened re-chromed and ground to size new seals and wippers. Gatters fitted to protect the exposed chrome on the forks.
Carbon ignition leads.
That about it.
Many mods to do:
Ignitech race 3 ignition and a bunch of new upgrades.
Some exhaust mods to the standard headers and mid chamber to improve flow and reduce back pressure.
Mods to the air intake with pre-separators ram air boost and cooling.
