Pictures of Custom max for sale on Ebay right now..

[Mad Jac]

Buster thanx so much for the info on pic posting here..

Anyone who needs to see additional photos email me

[email protected]

 

[Mad Jac]

I'd love to hear your feedback thanks..in advance.


Modifications are as follows:


V-max Bitz

- Super bike digital cockpit gauge: (Speedometer, tachometer, tripometer,odometer, clock, all stock vmax warning lights, shift light, speed warning, memory; top speed/ top temp/ top rpm, blue led back light (looks excellent at night, very stealth), rear speed sensor). $400
- ZBoost Manual Vboost (switch able From 0k, 6k or Always Off) $100 (instant "juice")
- Heavy duty Starter cable and positive battery lead Kit $60
- Heavy duty Ground cable and rectifier cable Kit $40
- Maxlight II Kit with 100/80 w light bulb in headlight $100 (outstanding at night, very bright)
- Modern Style 7?? Chrome headlight with Billet aluminum mounts $200
- Headlight on/off switch $40 (for working on the bike with the power on, but not draining the battery with the headlight on)
- Manual Cooling Fan on/off switch $40
- Engine case cover stainless steel bolt Kit $30
- Engine saver bracket O-ring stopper Kit $75 (a must for any vmax owner)
- Black anodized stainless steel wrap-around radiator cover $100
- Vented stainless steel carburetor inlet covers $50
- Billet aluminum engine breather covers $100
- Billet aluminum rear differential breather cover $30
- Billet aluminum Ignition cover $40
- Billet aluminum steering stem and rear axle nut covers $60
- Rear Brake caliper adaptor for R1 brake caliper and spacer $200 (custom made bracket for rear brake)
- Stainless steel carburetor cap bolts $20

Exactrep

- White faced handlebar clock $50
- White faced Oil temp dipstick $70 (liquid filled)
- Chrome and stainless steel Cruiser forward controls $500 (the ultimate in cruiser comfort)
- 20 amp Battery Box $30
- 20 amp Battery $100 (extra cranking power)

Cycle One Off

- Spin on billet aluminum oil filter adapter plate with cooling action and curved frame brace only available on 96? and UP V-maxes $200 (makes oil changes a snap)
- Black Handlebar mount oil pressure gauge $150
- Billet Aluminum slotted rear brake stay $40

Road show

- Billet aluminum clutch and brake master cylinder covers $40
- Billet aluminum scoop inserts $50
- Billet aluminum shock tower keepers with bungee tie down points $30
- Billet aluminum rear reflector stay upgrade $60
- Stainless Steel rear fender/crud catcher $200 (killer rear fender upgrade)
- Red anodized billet aluminum tire valve covers $10

Ultra Fast Objects

- Star fighter lowered seat conversion to all three seat pieces $235 (including brand new center seat section as the old one was cracked) (along with the drag bars and forward controls, makes riding a real pleasure)
- Smoked lens billet aluminum turn signals with smoked lenses, set of four $60
- 93 and UP front fork brace billet aluminum $100 (another major handling upgrade)

RMSport Max

- Single front and rear R1 brake calipers with EBC pads and hollow mounting bolts (to decrease un-sprung weight) $400 (ultimate braking ugrade)

Kuryakyn

- ISO wing passenger floorboards $90
- ISO dually pegs in the forward controls $70
- ISO grips with red accent rings $70
- Dual ISO throttle bosses $50
- Stiletto bar ends $50
- L.E.D. handlebar mount battery gauge $20

Python Motor Sports

- New stator $130
- New Reg/Rect $63
- Battery tender $26
- Purple anodized Billet aluminum Barnett Spring Clutch plate $140 (best clutch on any bike I have ever owned)
- Barnett carbon fiber clutch plates $100 (the perfect compliment)
- New front sealed wheel bearings $30
- New rear sealed and needle wheel bearings $40
- New steering stem bearings and races $37
- New sealed swing arm bearings and races $45
- Red and Black 13?? Progressive rear shocks $300 (way better than stock rear springs)
- Progressive Fork Springs lowers it 1?? also lowered 1?? in the triple trees $100
- Dynojet Stage one jet kit $125
- Black bar snake filled Drag bars $40
- Clear water pump cover $115 (very trick, I get a lot of compliments)
- Front and rear R1 brake caliper compatible brake discs $300
- Stainless steel clutch cable $40
- Stainless steel throttle cables $60
- Stainless steel rear brake line $40
- Stainless steel single front brake line $40

SuperTrapp

- Kerker 4 into 1 header, brushed aluminum can, and custom 2 1/2 inch exit baffle $1000

Lighting

- 7?? Modern style headlight with (maxlight 2) 100/80w Bulb and 35 w extra high beam bulb built in.
- 3 bulb L.E.D.?s in the scoops (white) under the rear seat (red) third brake light
- 10 bulb L.E.D. rear reflector brake and running light upgrade
- Billet aluminum Chrome plated Rear axle license plate holder with running lights. brake light, and plate illumination (including a custom made rear axle extended an inch)
- Twin P.I.A.A. 35w fog lights with handlebar mount L.E.D. on/off switch mounted to a powder coated stainless steel passing light bar.
- Scoop mounted turn signals as well, inside the scoops.



Performance

- Kerker 4 into 1 header light weight aluminum can in brushed finish/ jet coated inside powder coated outside black
- Custom 2 & ? ?? baffle and exit
- Dyno jet stage one jet kit
- Brand New K&N air filter
- Switch able ZBoost 0k , 6k and off
- VMax Outlaw fix and forget engine temp sensor upgrade (turns on radiator fan 30 degrees sooner)
- MaxCool radiator fan switch turns it on whenever you want
- Just had Valve job and adjustment
- R1 braking system calipers and discs, EBC pads stainless steel lines
- Full progressive suspension
- 2002 front end w/ fork protectors completely rebuilt with new fork seals and single Yamaha R1 brake conversion
- 1999 rear end also with R1 brake conversion, lighter brake stay and caliper mounting bracket
- Brand new Stator, Regulator/rectifier, 20 amp Battery, NGK Iridium Plugs, NGK red plug wires, Handle bars switches, Clutch master cylinder
- Billet aluminum handlebar risers custom made
- Brand new Barnett clutch setup
- Brand new Fuel Pump
- Brand new thermostat
- Brand new water pump
- Brand new Vboost setup and servo and rubber inlet boots
- All brand new bearings wheels swing arm steering stem etc.
- New radiator fan
- 1996 CDI
- 1999 rear brake master cylinder
- Battery tender plugs installed to battery (just plug into the wall and trickle charge will keep battery good for years).
- All new relays, new main fuse, new starter relay, new wiring
- All master cylinders have been rebuilt

Aesthetics

- Seat recovered in high quality black vinyl
- Faux Gas tank covered in expensive black leather
- Sissy bar pad custom made in black leather to match
- Color scheme is Candy Apple Red highlights over Silver Vein Clear Coated and Semi-Gloss Black and Chrome? This was inspired when I saw the paint scheme on the 2005 anniversary edition V-max.
- Candy apple red is a two step process, mirror silver first and then clear candy red clear coat.
- Only the Frame and motor block are not powder coated on this bike

Powder Coating

- Front and rear rims
- Side covers
- Clutch cover
- Water pump cover
- Valve covers
- Coolant side covers
- Breather covers
- Swing arm pivot covers
- Rear brake stay
- Rear caliper stay
- Exhaust minus can
- Stator cover
- Middle gear cover
- Handlebars
- Master cylinder covers
- Fork brace
- Triple trees
- Stem nut covers
- Crud catcher
- Aluminum rear reflector plate
- Stiletto grip ends
- Faux tank cover under leather
- Swing arm
- Levers
- Fog light stay
- Luggage rack, mounts
- Complete rear passenger backrest stay assembly
- Shock top keepers
- Rear passenger floor board stays
- Scoops
- Scoop inserts
- Vented Carburetor inlet covers

Miscellaneous

All modern upgrades have been done to this V-max including: Spin on oil filter adapter with passive cooling action (better than stock 96 an UP), 2001 front end 43mm with R1 brakes. No cheesy pre 93 40 mm forks. No scary 85? -92? double piston calipers on front end or rear. This bike has incredible stopping power and with only one front and one rear brake. All metal surfaces have been given a durable powder coat finish to protect against corrosion and the elements, road dirt and bugs wipe right off with a dry paper towel only.

- Through the chopping process I have reduced the weight of this motorcycle by over 120 lbs.

- No stock fenders front or rear
- No center stand springs or mounts (if you ever remove this from your bike weigh it, you will be surprised just how much it weighs)
- 18 Lbs. exhaust over stock 70 lbs.
- Stock controls removed ( these are heavier than Exactrep forward controls)
- Stock complete handlebar riser setup removed
- Stock headlight removed
- Single front disc brake
- Spin on oil filter adapter
- Single R1 rear brake setup
- Clear water pump cover
- Ultra-Light weight battery
- Rear rim is the lighter weight version 85?- 86? still as strong but more inside material removed (I have weighed these as well and in this rebuilding process have shipped 3 V-max rims through EBay).
- I could go on and on?..

- All fluids recently changed oil, final drive oil, brake and clutch fluid and engine coolant (pinkish red to match bike). Less than 100 miles on new oil filter.

- Everything that has been replaced on this bike was done so with new dust seals, bearings, oil seals, washers, nuts and bolts.

- Nothing on this bike leaks any fluids.
- Bike is 100% street legal in Florida with all turn signals and lights. In other states I don?t know maybe you might have to add a front fender and some mirrors that?s all. (they are listed on EBay for sale all the time and Exactrep has some really interesting after market ones for sale on their web site, or do like I do and ride without one, that?s what the $100 stainless steel wrap-around radiator cover is for). Maybe some mirrors.
- Brand new tires front and rear.
- Everything on the bike has brand new upgraded, sealed bearings
- Due to changes nothing about this bikes lets you know it is a 1990 except the title, all Yamaha factory upgrades have been made including: spin on oil filter, upgraded brakes, 43mm forks etc.
- All work done by ?Scotty too hotty? @ RTM performance
- It starts every time I stick the key in the ignition. I change the oil every 1000 miles with Yama Lube. I have never used synthetic oil in this bike. This bike has absolutely no issues at all and most people, who see it, while they are covering their ears, ask me if it is brand new. Second gear is strong and has zero problems.

- Bike has never been down, crashed rebuilt or damaged. The bike has never been raced or abused. Bike is garage kept always and is never out in the rain.
- I purchased this bike in June of 05? for $2900 with 33,733 miles on it. The new digital dash has about 600 miles and it was installed during this transformation. The bottom end of the motor has remained untouched, but my mechanic tells me that the half shell bearings on the crank and piston rings may not be a problem until well after 130,000 miles and beyond as long as I take good care of the bike. I have a friend here in Tampa with an 86? V-max with over 111,000 original miles on the motor and still runs like new. I also have a friend with a Honda Gold Wing, who tries to keep up with me, with over 200,000 original miles no rebuild, it?s all in how you take care of your machine. I have had the top end of the motor rebuilt as part of the make over on my bike. Heads have been ported & polished new valves stem seals and all proper adjustments have been made, new valve cover gaskets and rubber o- rings. Japanese bikes run forever we all know that.
- When I first got this bike it ran very strong (I believe due to good maintenance) it made 116 hp on the dyno.
- After head work, jet coated kerker 4 into 1 with 2 ? exit baffle, stage one jetting, Brand new K&N air filter, carb sync and clean, ZBoost, NGK wires and Plugs, Barnett Spring Clutch with Carbon Fiber Plates and a fresh oil change the DYNO results are as follows.

- ZBOOST off 110 hp for those times when you need more control and less power at the rear wheel
- ZBOOST 6k 121 hp stock setting we all know?.. hold on tight
- ZBOOST always on 127 hp...hold on

- This is why I went with stage one instead of seven; I wanted to be able to have the power when I wanted it but, also get better gas mileage when I wanted too.

- After reducing the bikes weight and increasing the front fork size, I don?t begin experiencing high speed wobble until 135 mph. Even with the rear bias ply tire.
- I?m sure 17?? rear wheel and/ or braced swing arm would eliminate that problem.
- All fluids recently changed oil, final drive oil, brake and clutch fluid and engine
coolant (pinkish red to match bike). Less than 100 miles on new oil filter and oil.

*****Included ******

- 4 helmets
- 2 are novelty type one black and one chrome, sizes are one size fits all
- 2 are full face type one white Shoei tinted shield size XL and one red, black and chrome ARV to match bike with clear shield size L $400
- 1 tour master suitcase which looks exactly like an airplane carry on bag with a telescopic handle and wheels. It rests on the luggage rack of the bike and straps to the sissy bar. This item is very cool for touring; you go right from ride to rolling to hotel room with all your gear. And it gives your passenger a back rest at the same time. $150
- 1 tour master mini touring bag same deal sissy bar mount but smaller for short trips or day trips. $75
- The stock 85?-95? oil filter housing and the perforated oil filter housing bolt
- 4 NGK iridium spark plugs for the bike brand new $50
- A spare set of front pegs for the forward controls $50
- A brand new Chrome motorcycle brake disc lock with 2 keys $60
- Book to the digital speedometer
- Brand new battery tender
- Clean Florida title to the Bike in my name transferable immediately to you the purchaser.
- 3 keys to the bike that all work in the ignition, gas cap and faux tank lock.
- Also a spare rear differential that has been cleaned and prepped by me for shipping to John fuber for the RM Sport Max rear royal star gear swap.
- A huge box of spare parts including the original driver controls, spare radiator fan, old frame brace, spare front steel brake line, lots of spare bolts, nuts and hardware and two brand new spin on oil filters.

 

[Buster Hymen]

Wow, there's some pieces on your bike that I've only seen on modified European bikes. Your VMax certainly comes fully equipped!

 

[Rusty McNeil]

Very nice list of Mods, lots of stuff I'd like to do some day.
I wouldn't sell it though if you built it, you're gonna regret it.

Incidentally

"18 Lbs. exhaust over stock 70 lbs"

I weighed my stock exhaust, the whole assembly including bolts, shields, covers, etc, last night when I removed it from my bike and it weighs 42 lbs.

 

[Mad Jac]

wow cause i wieghed the mufflers and catalictic converter peice only and it weighed over 50 lbs. maybe it had alot of built up **** and crud in it. I know because i shipped it to someone.

 

[Mad Jac]

And also yes a lot of the mods i bought from europe. UK and germany sell the best stuff.

 

[Rusty McNeil]

wow cause i wieghed the mufflers and catalictic converter peice only and it weighed over 50 lbs. maybe it had alot of built up **** and crud in it. I know because i shipped it to someone.

Maybe they've changed from one year to the next?

 

[Mad Jac]

Well yes they have starting in 1986, due to strickter pollution laws I assume. What year is your Bike? Some I have seen all black and some years i have seen chrome. but i did have my kerker shipped to me 4 into 2 into 1 with brushed aluminum canister weighed 18 lbs right on the postal scale stamp on the box. Sooo... Whatever the stock weighs lets say 60-70 lbs depending on age year and condition, its definately significantly more than the kerker header and can. thanks for looking

 

[Mad Jac]

I will take $7500 cash for this bike.

[email protected]

I'll take phone calls if you like.

 

[Rusty McNeil]

Well yes they have starting in 1986, due to strickter pollution laws I assume. What year is your Bike? Some I have seen all black and some years i have seen chrome. but i did have my kerker shipped to me 4 into 2 into 1 with brushed aluminum canister weighed 18 lbs right on the postal scale stamp on the box. Sooo... Whatever the stock weighs lets say 60-70 lbs depending on age year and condition, its definately significantly more than the kerker header and can. thanks for looking

Yeah, mine's a '99 that had all chrome exhaust.

The UFO exhaust I installed weighed 22 lbs complete.

 

[Mad Jac]

yeah the UFO is 4 inot 2 into 2 tight? hence the extra 4 lbs. for the second can. I think i might have also included the wieght of the center stand in that number, I had to remove it to put my kerker setup on, but honestly i would have removed it anyway due to its weight. thanks again for looking.

 

[Mad Jac]

So, far on ebay...

835 views
37 watchers
4 bids up to $1,100
and all in less than 18 hours of posting the auction.