Rear axle bolt

[Vman23]

Ok. What am I missing here? Tightening the rear axle bolt to specs. 150 newtons. I don’t even get to it. It locks wheel up to tight. It smashes the caliper bracket into wheel.
I have the washer in between the hub and caliper bracket. If I do it hub>bracket>washer>swing arm. It locked the wheel up.
So what am I missing here??

3rd pic is from the picture in the manual

 

[CaptainKyle]

That second picture looks like you are missing the collar that goes in the wheel on the right side . Also most of us have discovered when you tighten them to spec it makes the final drive run Really hot.

 

[Fire-medic]

This is a perfect reason why people should put their bike, and mods, on the signature line. Then we know what to offer for year-specific info.



https://www.ronayers.com/oemparts/a/yam/50045c15f8700209bc794309/rear-wheel

 

[Vman23]

That second picture looks like you are missing the collar that goes in the wheel on the right side . Also most of us have discovered when you tighten them to spec it makes the final drive run Really hot.

I found the collar in backseat. didnt realize it had one. lol

 

[Fire-medic]

A word to the wise, look for those things when you dismount your wheels to get a replacement tire mounted at the shop. I once had to return to the shop to 'collect' my missing spacer.

 

[CaptainKyle]

I found the collar in backseat. didnt realize it had one. lol

Glad you found it !

 

[Maxnewby]

#5 ??

 

[Stephan]

The missing part is actually shown on the rear brake diagram (which doesn't help)
and is #7, part number 90387 200J2.

 

[Stephan]

Rear brake diagram attached...

 

[Maxnewby]

Rear brake diagram attached...

Thanks for the reply.

 

[Vman23]

Glad you found it !

Me too