Rubbing issue

[Ufuk Hattat]

Hi all, my bike is equipped with a 240 tire kit. There were no problem until yesterday. While I was moving the bike with the engine shut off, I heard a squeaking noise coming from the tire. After a little inspection, I found the outer edge of the tire is slightly rubbing the shaft it self. What could be the issue?

 

[Itgoes]

Assuming the wheel is installed correctly, the clearance is still extremely tight with a 240 tire. What tire is on there? I think there may be one brand that does rub a little but I forget which one.

If you having a lowering link the tire can also rub on the inner fender.

 

[Ufuk Hattat]

Assuming the wheel is installed correctly, the clearance is still extremely tight with a 240 tire. What tire is on there? I think there may be one brand that does rub a little but I forget which one.

If you having a lowering link the tire can also rub on the inner fender.

Thanks for the reply Itgoes. I have Michelin Commander and I have no lowering links.

 

[satriani]

Thanks for the reply Itgoes. I have Michelin Commander and I have no lowering links.

i also have the same issue with rubbing and have the michelin tire as well

 

[MaxMidnight]

Just a thought but once you start moving and centrifugal force starts to kick in might the tyre 'grow' and thus clear the swinging arm?

If it has been on for some time and there is no obvious signs of rubbing on the sidewall I wouldn't be concerned.

 

[marsmax85]

what's your Tire pressure ??

 

[satriani]

what's your Tire pressure ??

my tire pressure is 40 psi

 

[marsmax85]

my tire pressure is40 psi
[/QUOT

 

[marsmax85]

I ran 42 psi in the rear also had shinkos and last tire was q3 with no problems