Stage 2 cams?!?!

[Theemax]

Looking at a max with stage 7, Dale Walker 4 to 2, and stage 2 cams. How much difference is there between stock cams and the stage 2, and what would the approximate fuel mileage be with this setup?:confused2:

 

[one2dmax]

Everybody has fancy names for the cams. Give us some specs. You should still get similar mileage with similar driving.

Sean

 

[satariel666]

Sean.
Honestly, how much more power did You ever seen with modified cams?
I mean modified as much as they can be.
Lets say stock displacment, good carb kit and good full exhaust...or...whatever :biglaugh:

 

[Damon]

The stage #2 cams might be from PCW? they have the specs on thier stage #2.

 

[Theemax]

The guy who owned the bike passed away and I was talking to his kid. I am gonna see if I can have any paperwork the kid has, faxed to me, so as of now, this is all I have to go on. BTW, the kid told me it dyno'd 198 to the ground, which is a pipe dream:rofl_200:, but I just wondered about the aftermarket cams, and what if any advantages they have.

 

[satariel666]

Who knows!
Maybe its 1570cc with chaindrive :rofl_200::rofl_200::rofl_200:

 

[old timer]

Smoke and mirrors...:confused2:

Remember when the kid down the street put a 3/4 race cam in his old mans Bel Air...and there was no change at all...:ummm:

 

[spursmech]

Smoke and mirrors...:confused2:

Remember when the kid down the street put a 3/4 race cam in his old mans Bel Air...and there was no change at all...:ummm:

Yes, I remember that, ran bad and leaked oil. Ha Ha, those were the daysunk:

 

[KJShover]

I'm running cams from Megacycle. they're the second in line, so I guess you can call them stage 2, being they only make the 3 grinds.

I've noticed a sweet midrange pull with everything else seems to be about the same. t

the cam's specs are:
Lift = .354
duration @40 = .254 106deg lobe centers.
Intake open/close = 21btc/53abc Running clearance .006"
exhaust open close = 53bbc/21atc Running clearance .008"

 

[Theemax]

I left a message last night about paperwork, but have not heard back yet. I know the stock cams on my last bike had a noticable lope when cold, but not after warming up, are the stage 2 cams about the same?

 

[one2dmax]

It all depends on idle speed setting and how well the carbs are synced. It won't lope like a big cam in a car engine.

Sean

 

[KJShover]

I left a message last night about paperwork, but have not heard back yet. I know the stock cams on my last bike had a noticable lope when cold, but not after warming up, are the stage 2 cams about the same?

I have my bike set at about 1000-1100 rpm, no real lope. but if I drop the idle down is lopes a little but not too far off the way it did new.