Take a look at this........

[Johnc1go]

I gotta agree with the other guys about the big bore and advertised HP. Who bores out an engine, adds a stage 7 kit but keeps the factory headers? How can the engine even run right if you open up the intake without opening up the exhaust? To me, it's trying to breathe through a straw. I would be skeptical of the seller's claims.

 

[fmcandrew]

I'm pretty sure a test ride would answer the question...a 50hp bump on a 600lb+ vehicle will be VERY noticable!

No drivie...No buyie

 

[customizedcreationz]

The person that would have a stock looking exhaust might be someone like me years ago. I would run ALOT of my vehicles to look like stock, but be other wise.

The guy might also like the stock exhaust sound, and didn't need that extra 3-4 hp from an aftermarket pipe. Or maybe ran out of money.....

So there are viable reasons.

Todd

 

[Biker Dash]

I don't think it would lose that much power with the stock exhaust. You only gain about 2-4 hp with aftermarket exhaust.

I think the video one sounded deeper, but after listening to it again, I am not so sure.

Todd

Actually, the stock exhaust can only support so much flow. While replacing an exhaust might only net a couple hp increase, if no other mods are done, sometimes, you NEED much better flowing exhaust to support the increased power caused by the severe increase in air going in. Where this bike supposedly has 300 more cc's of displacement, and a Stage 7 kit, it should be receiving a FUCKTON more air, which means it needs an exhaust that will flow an equal amount. If you don't, you'll have a bike that runs like ****.

 

[tugla]

with the tq of the 1500 even with stock pipes must be a animal and feel different then a stock bike...
worth a test ride and also check second gear that there is no issues.


also if its a pcw mod maybe they know the bike and can confirm the mod.....

 

[dannymax]

with the tq of the 1500 even with stock pipes must be a animal and feel different then a stock bike...
worth a test ride and also check second gear that there is no issues.


also if its a pcw mod maybe they know the bike and can confirm the mod.....

Yup....just need the 4 digit code under the #2 or #3 intake, PCW can fill in the blanks.

Just a sneaky feeling you will hear ' don't feel like messing with all that....make me an offer'......:biglaugh: