Much loved full-power 1997 Vmax 1200 – Selling to fund new project (another VMax!). It's a great looking bike and has been incredibly reliable.
This bike is an absolute hoot to ride and, thanks to the chassis upgrades, handles very, very well.
It has the greatest road-presence out of any bike I've ever owned. People take notice of you coming and the traffic usually gets out of your way like Moses parting the Red Sea!
The 4-2-1 exhaust system and stubby carbon can lets the V4 engine bark like a vicious dog and the low rumble of the engine is more reminiscent of a V8 muscle car than any other bike on the road.
Here’s a run-down of the specs…
Engine;
Front-end;
Rear-end;
Misc;
This isn't a show bike, it's been built to ride and has seen plenty of use. So, it's probably not for you if you're looking for something pristine. In my opinion, the pictures accurately reflect the condition of the bike, but if you're unsure about anything just ask for pics of whatever you want to see, or come and take a look at it in person. (Sheffield, S25)
I’ll be taking the bike for an MOT this week, so you’ll be riding away with a full, 12-month MOT.
Full-resolution original photos can be found here…. http://imgur.com/a/Qcd3J
Looking for £4000 ono.
This bike is an absolute hoot to ride and, thanks to the chassis upgrades, handles very, very well.
It has the greatest road-presence out of any bike I've ever owned. People take notice of you coming and the traffic usually gets out of your way like Moses parting the Red Sea!
The 4-2-1 exhaust system and stubby carbon can lets the V4 engine bark like a vicious dog and the low rumble of the engine is more reminiscent of a V8 muscle car than any other bike on the road.
Here’s a run-down of the specs…
Engine;
- Full stainless 4-2-1 exhaust system with oval carbon stubby can
- Switchable V-Boost ~3000/6000 RPM
- Stage 3 Dynojet kit - performed by Powerhouse Automotive
- K&N Air filter
- Recently fitted “engine saver bracket” and improved O-ring on oil line in sump.
Front-end;
- Hayabusa USD forks – extended by 40mm
- Billet “thug” yokes
- Billet handlebar risers
- Hayabusa front wheel with 320mm brake discs
- Tokico 6-pot calipers (recently completely rebuilt)
- GSXR1000 radial front brake master cylinder & lever
- Braided brake hoses all round
Rear-end;
- Braced swingarm, including notch to accommodate 180/55 rear tyre
- FJR1300 rear wheel
- Custom rear brake hanger bracket
- R1 blue-spot caliper on rear wheel
Misc;
- Shortened subframe
- Shortened Exactrep “Single seat conversion tailpiece” – but with seat pad for pillion
- Exactrep “bullet-style” belly pan
- Exactrep “Mega-air-scoops”
- Brushed aluminium knee plates
- 6” round LED headlamp
- LED tail/brake light
- Side-mount reg-plate
- Standard clutch master cylinder with billet “Vmax” cap
- KOSO digital speedo
- Motobatt Gel battery
- Black anodized bar-end mirror
- May have Barnett clutch plates & spring conversion - The bike came with a pile of receipts & the receipt for this was included (dated 2008). I've not had the clutch cover off to confirm.
This isn't a show bike, it's been built to ride and has seen plenty of use. So, it's probably not for you if you're looking for something pristine. In my opinion, the pictures accurately reflect the condition of the bike, but if you're unsure about anything just ask for pics of whatever you want to see, or come and take a look at it in person. (Sheffield, S25)
- There are a few bits that I would’ve liked to have got sorted if I were keeping it;
- The bike used to have “v-stax” style velocity stacks on the sides of the carbs. Unfortunately one of the velocity stacks fell off, so I removed them all while I was looking to find a replacement. The slugs are still there waiting for a replacement set to be fitted.
- The rear wheel and swingarm were spray-painted black, this finish has seen better days and it could do with either touching up or powder coating.
- Clutch cover has been given a knock at some point, so there is a bit of damage to that, but this has never caused any issues for me.
- The general condition of the bodywork could do with smartening up a bit, but it’s reflective of any bike this age that's been used.
I’ll be taking the bike for an MOT this week, so you’ll be riding away with a full, 12-month MOT.
Full-resolution original photos can be found here…. http://imgur.com/a/Qcd3J
Looking for £4000 ono.
Attachments
-
18238777_1890500297828746_7105522032441172219_o.jpg98.1 KB
-
18193317_1890500537828722_5333111419800272743_o.jpg94.7 KB
-
18209122_1890500531162056_5235245948891175843_o.jpg82.8 KB
-
18198776_1890500217828754_7263852784100623446_n.jpg95.2 KB
-
18208983_1890500637828712_1736088226051884751_o.jpg135 KB
-
18216681_1890500451162064_9037070586365791886_o.jpg80 KB
-
18278147_1890500287828747_8570482525533204868_o.jpg84.5 KB
-
18193129_1890500221162087_6693346087840288488_o.jpg87.7 KB
-
18237908_1890500357828740_1800049460115330946_o.jpg94.1 KB
-
18192492_1890500447828731_865230191033713244_o.jpg81 KB