Vboost timing

[Harv3574]

Hello everyone. Iam new to this forum I have a 2009 vmax. I have done the air box mod and had Tim Nash (The Guru) reflash the ecu along with V&H CS-1 exhaust. Does anyone know if its possible to trick the vboost to come on at 3000 rpm instead of 6000 rpm. I had an 1990 vmax and you could "Trick" the vboost by jumping a couple wires coil signals if you will to come on early. Is it possible to do something like that with the GEN 2 models Thank you

 

[MaxMidnight]

Assuming you are talking about a Gen II then as far as I am aware it doesn't have V Boost?
I does have YCC-I YCC-I (Yamaha Chip Controlled Intake) which electronically varies intake length though.

 

[Harv3574]

Hello everyone. Iam new to this forum I have a 2009 vmax. I have done the air box mod and had Tim Nash (The Guru) reflash the ecu along with V&H CS-1 exhaust. Does anyone know if its possible to trick the vboost to come on at 3000 rpm instead of 6000 rpm. I had an 1990 vmax and you could "Trick" the vboost by jumping a couple wires coil signals if you will to come on early. Is it possible to do something like that with the GEN 2 models Thank you

 

[Harv3574]

I stand corrected maxMidnight. Absolutely right on the YCC not Vboost. However Is there a way to change the event timing? Or is it better just left alone? Just curious. Thanks MaxMidnight.

 

[one2dmax]

You can have it reprogrammed but it will actually hurt you power (just like the T-boost hurt power on the early bikes)