What did you do to your Vmax today? Part 2

[dannymax]

I bought a second snail and a BOV for the reaper. a few ppl know what I'm doing with the other moter. :biglaugh:

KJ, you need to switch your 'translator' back to English!! Yer talkin' in some weird tongue......:rofl_200:

 

[kaboom]

KJ, you need to switch your 'translator' back to English!! Yer talkin' in some weird tongue......:rofl_200:

Makes perfect sense to me:confused2:

 

[gamorg02]

few things..

1. think i finally got the tuning done. maybe. i hope so. 155 mains, vboost always on, stage 7 needles, 2.5 clips, 177.5 paj2's, stock springs, drilled slides... runs great. pulls like never before, we'll see on mileage.

2. got my carb stax installed. they are kind of a pain so maybe it will keep me from fidling with my carbs, heh. pics attached.


anyone know what size our headlights are offhand?

 

[dannymax]

few things..

1. think i finally got the tuning done. maybe. i hope so. 155 mains, vboost always on, stage 7 needles, 2.5 clips, 177.5 paj2's, stock springs, drilled slides... runs great. pulls like never before, we'll see on mileage.

2. got my carb stax installed. they are kind of a pain so maybe it will keep me from fidling with my carbs, heh. pics attached.


anyone know what size our headlights are offhand?

Black stax look bad-azz Garrett!! unk:

Believe the headlights are 7"....yer looking for a headlight grill aren't you!!
Save us a trip to the Bronx!! :rofl_200:

 

[KJShover]

Believe the headlights are 7"....yer looking for a headlight grill aren't you!!
Save us a trip to the Bronx!! :rofl_200:

Here ya go, buy it now 2 for 10$ :biglaugh:

http://cgi.ebay.com/ebaymotors/ws/e...1ffa500ae&rvr_id=&ua=WXI8&itemid=200423173284

 

[headknocker]

droped oil pan this mornin, checked "o" ring, all is good sprayed sea foam to clean out all inside, now going to replace pan, and take a little ride HA !!! HAAAA!!!!!!!!!

 

[gamorg02]

Black stax look bad-azz Garrett!! unk:

Believe the headlights are 7"....yer looking for a headlight grill aren't you!!
Save us a trip to the Bronx!! :rofl_200:

thanks man and YES SIR!

Here ya go, buy it now 2 for 10$ :biglaugh:

http://cgi.ebay.com/ebaymotors/ws/e...1ffa500ae&rvr_id=&ua=WXI8&itemid=200423173284

sweeeet. i found some for $25 and thats even cheaper, and they're 25 miles away.

 

[Thevmaxrider]

Dreamed about the day when Toxic will be returned to me better than before. We can rebuild it, we have the technology..........

 

[gamorg02]

whats the eta jim?

 

[FREERIDER]

Put a duct tape binding on the shop manual last night while the kids helped me organize the garaged/shop.
As soon as Nana takes the kids for while Im gonna go and take the rear end apart. Couldnt get rear axle out last time I tried. The whole rear end is kicked alittle sideways off line due to its flight without me and crash landing threw a tree, threw a fence and to the ground. I think I need to take the shocks off to get that danm wheel off.

 

[Thevmaxrider]

whats the eta jim?

Tentatively the 15th of May give or take a couple of days. Have to have a couple of days to get Toxic back in running order, tweak the EFI, synch the throttle bodies, etc. Then have to go on a couple of short rides just to make sure I don't have a problem on the long ride I have on my schedule for the 22nd of May.

 

[KJShover]

Went for a little ride. I screwed up and thought I had my helmet cam on. instead when I got home, I discovered I was turning it on when I was at the stoplights instead of pausing it.

pisses me off, cause I would have got some nice footage. the bike didn't seam right when I was going through some sweepers. I went and got me some hose clamps. and what do you know. I didn't need to spend the time or money on frame braces, braced swingarms, gusseting or any of that crap. these things did the trick. Now to get them lightweight carb chains and I'll be set.:rofl_200:

on a serious note, 60 deg and perfect sunny weather, the reaper ran flawlessly, street sweepers were out and the roadway clean. Couldn't ask for any better riding conditions. I just can't wait for things to start to green up.

 

[nd4topspd]

started organizing all my parts and then started cleaning,painting,and polishing some pieces :eusa_dance:

 

[twistedmax]

got my inspection sticker todayunk:now Im all legal:rofl_200:..If time pemits Ill tweak the EFI before the BR2010.Ive been workin for six months on a project I hope to unvail at the BR2010.its gonna be close but I think Ill be ready.:ummm:

 

[gamorg02]

can't wait to see it rick. set of pivot caps almost ready.

also had my new highway pegs powdercoated, thanks nate! i'll get a pic up tomorrow!

 

[dannymax]

Nice detail work Garrett! Are the red ones spoken for? Sallymax is telling me to grab up a pair for her....maybe you could bring them over for the Brownie Run?

 

[gamorg02]

Nice detail work Garrett! Are the red ones spoken for? Sallymax is telling me to grab up a pair for her....maybe you could bring them over for the Brownie Run?

no problem danny, what colour u thinking?

oh here are the highway pegs! i think they look awesome and did a quick non-moving try and they'll definitely help out with the leg cramps. should be ready to roll for pitts. now i just need to get my new rear tire and then mounted.

 

[Thevmaxrider]

Yo Garrett, satin black with gold tuning forks????? Hook a brotha up!:eusa_dance:

 

[Nicki66]

Garrett, pegs look great, now you need to PC your case guards too.

 

[gamorg02]

they are! thats a reminder to me to always check my feet before i put it on the CS.