white

Hi I have rebuilt a Vmax from 1986 and everything works great now, except the start switch won't work. All of the electrical are connected where it belongs except for the white oil level wire, I can't figure out where it's supposed to go. And I can't find my Haynes book either, so any...

Hi guys, the last time I had started my 2005 vmax was a couple of months ago. I started it today. Started fine. Left it running in the garage and went inside the house for some breakfast. Came back 15 min later, the bike was still running but there was a bunch of gas on the floor, and white...

I recently purchased a beautiful 2009 Vmax. I loved my 85, but it was time for an upgrade. Anyway, I have noticed that on the right side of the bike, there is a white substance that is weeping out of the holes at the head. I don't have a clue what it is, unless it is a little antifreeze coming...

I'm getting some light white moisture type smoke from my crankcase breather hose, as I'm running flat slides do not have a stock air box. It happens when the engine has run about a couple of minutes from a cold start, and does it when warm, but there is no oil coming out of the hose, the engine...

I'm embarrassed to ask, not me ch engine experience here. Symptom: Whitish smelly smoke from exhaust, usually one side at a time Onset: 2-3 weeks ago when it got cold out (low 20 F/-6 C) Duration: Until I back off the choke (under 30 sec before choke is at half and it stops Intensity: it makes...

I had a friend misplace the threaded plugs and little springs that hold the needles in the slide. Not sure what happened. Think carbs were apart for a while. I sent him the ones out of my spare diaphragm assemblies. So now I need 4 springs and 4 screw plugs. I can get them I think in a needle...

http://www.npr.org/sections/thetwo-way/2015/06/07/412708943/video-shows-texas-police-officer-pulling-gun-on-teens-at-pool-party?utm_source=facebook.com&utm_medium=social&utm_campaign=npr&utm_term=nprnews&utm_content=20150607 Had a pretty good run on facebook with a few people on this...

Pics of the bike and rims, should be 4 images total: https://imgur.com/98AAkia,1DkAFkO,reJkGSR,R83PAks So basically, I'm putting these radials on and I have them plastidipped white with one can per rim. Plastidip basically is a durable rubber coating but if I want to remove it all I have...

https://i.imgur.com/8oewHKo.gif

Ok the surprise inst finished yet so i will have to keep you waiting but check this out i did all this work with a spray can and vinyl and it look really good very happy with end result.

On Sunday, a New Black Panther Party leader using the name "General Taco" said members of the New Black Panther Party will hunt down and kill white people, The Blaze reported Wednesday. Saying that the future of the organization is "absolute total destruction" of what he called "white...

Smokes a little when revving up in neutral, but mostly just after up shifting. Havent noticed any fluid level changes.....yet. But it just started doin this. She is still runnin like a champ and i wouldnt have noticed but a buddy was behind me yesterday when it was doing it. Any ideas? Nemesis...

so guys im 120 miles from hom. and the bike is dead. i was on the interstate cruising at about 75 and started to lose power, pulled over fot a big puff of white smoke out the exhaust and the thing died. i pushed it to a gas station and itll xrank but its literally POURING white smoke out the...

Just plugged it in. Moto version, vibration resistant Made in Japan 39.99 dealer Supposedly better than stock. Will advise once I drive at night. Removed a Phillips H4 #12342, made in Germany. Don't know fit was the stock one or not. Actually went to get the Sylvania, but...

Hai there, Does anybody have or know where I can get some pictures of a white VMX1200 They seam to be very rare and can't find them. I'm intrested to spraypaint a VMX1200 pearl white but first want to look if it fits. THX

my plugs are grayish white in the center and a little black on the outside its running better than it ever has (completely stock) ive completely rebuilt the carbs after trying to soup it up i installed a stage 1 jet and dyno ign. then took them out always with the same results...

Hey guys, I am new here and this is my first post. I have an 85 that I traded for this last fall. The guy I got it from said it had been sitting for about 2 years. So I just started working on this thing and may have bit off more than I can chew. My buddy, another VMAX owner (robsplatf4)...

Ok, I need some winterization advice for the bikes (Max and ZX6R). It's gonna snow, it's gonna get cold (-30C/-22F), so what do I do? Bikes will be stored in my UNHEATED shed, existing floor is concrete, the addition I need to add will be wooden.

Got this in an email and found it funny so decided to pass it on. Turn up your speakers and enjoy:biglaugh: http://homepage.mac.com/doug_arrington/home/white_christmas.swf

So, I have been told about "The White Mist" twice now by people I have been vigorously out-accelerating. It has been described at a white cloud/mist emanating from what appears to be the balance tubes on my stock exhaust. As far as I know, it only happens when V-Boost is open. The first time...