carb synch problems

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mattmullins

Well-Known Member
Joined
Apr 22, 2011
Messages
158
Reaction score
0
Location
des moines
Ok put in the morely kit went to synch the carbs, Carb 3 and 4 went to adjust and the idle changed but the Gage does Nothing, switched hoses around same thing
 
You got 4 hoses hooked up to four carb vac ports?
 
sitting on the bike the cylinders are numbered as follows
2 4
1 3

You sure Vboost is closed? What RPM speed are you trying to sync at ?

Most of the time it's #4 screw has to be turned in to get right side closer to left side sync and make the meter move is what I have found.

http://www.vmaxforum.net/showthread.php?t=3959
 
if the idle changed something happened, if the gauge doesn't show it i'd suspect the gauge
 
Found the problem, when I put in morelys kit the crank vent tube was hitting the v boost not letting it close all the way
 
Found the problem, when I put in morelys kit the crank vent tube was hitting the v boost not letting it close all the way
 
Back
Top