advice

Right I have gotten my tcat wheel on with a 0.05mm.difference from side to side so very happy with it next I put my discs on and measured where the disc sitsnon the wheel again I see the 0.05mm difference finally I fit my blue spot calipers and only 1 side needs adjustment by 1.5mm I cant...

I'm a new member and first time VMax buyer. I came close about 10 years ago, but I 22 and single; I could afford the bike but not the insurance. I'm finally in a place where I can get back to it. I've got a line on what seems to be some good deals. This one would be the easiest for me to get...

I am a first time poster and long time admirer of VMAX. I am planning to meet a guy this weekend to see about purchasing his 2006 VMAX with 8900 miles. I plan on bringing it to a shop to have them look it over, the seller has no problem with this. He is apparently an ASE certified mechanic...

Ok my boyfriend changed out the spark plugs in his honda vtx 1300 now it's doing this... (Video coming) Sent from my iPhone using Tapatalk

I appreciate all your help I bought it for 3200 it runs incredible any advice or maintaining it I appreciate it its stock well it does have a super trap exhaust wish was it more sound but it will have to do now any advice on oil to run or fluid to use and such would be appreciated I think the...

Hey guys, I've spent the last two days pressure washing my deck back to a new, pretty state. Its pressure treated lumber, about 6 years old. Other than Thompson's Water Seal, which come to my mind only because they are well known, does anyone have recommendations on a good sealer? I realize...

The PO had drilled out the baffles on my vmax, so I bought another set of cans, and am having trouble installing them. I saw the thread on how to remove the mufflers, but then how do you get the pipes back on? I struggled for hours tonight trying to get the stock mufflers back on my '01. I...

Wife hit a curb while turning and it appears to have taken a notch (1/2 inch) out of the rim. Tire still holds air but sustained sidewall damage so will have to be replaced. Is rim OK or will this also need replacement?

After getting a few ideas from other peoples new paint, I spent a few minutes playing around on the computer. What do ye think I should do? PS: this will be a back yard - rattle can spray job current color scheme new; black with yellow/gold pinstripe

Hi, I was just about to change oil in my vmax and i tought that I'd buy one of those magnetic drain plugs. The problem is that the old drain plug is longer than the new magnetic one that the dealers gave me. The magnetic drain plug still fits though, should this matter at all? I read...

大家好, Looking for some advice. Sean set me up with some great looking racing stripes, I just uploaded it to a new album "Llamrei reborn" - and I need some advice NO - not about the big Tach - I know it looks awful at first sight and should be in the center. I`ll probalby move it to center...

Just bought an '89 Vmax, it was backed into by a truck which knocked it over onto the right side. It's got a Kerker 4-1 on it, so when it tipped the muffler can got smashed pretty good. Smashed to where the can needs to be cut apart to remove the core... I've attached some photos of the smashed...

I just signed up to the forum and am glad to see so many riders that are passionate about their rides. I don't have a road bike right now, but as I explain below, am in need of some advice from those who have already went though the experience. I was/am looking to buy a G2 VMax and last fall...

My wife just got her mc license this past weekend. She is 5'0 110 #'s. I'm looking for a bike that would fit her that is at least 500cc's or larger. She is petite so I need to find a bike that is low to the ground and not super heavy. I'm sure some of your wives drive bikes just looking for a...

I should have my motor together and ready to fire up in the next few weeks. Starting to think about the carbs. To start with flatslide are completely out of the question. I've got a come up with a combo that'll work with this motor utilizing the stock carbs. It's already set up as sort...

I'm looking for more HORSEPOWER more NOISE and someone to do the work.:punk: Someone who knows the vmax and won't be breaking their cherry on mine! I am in northern Alberta but I don't mind driving it some where. Also I don't know anything about jetting and what is needed....:ummm: I'm...

:DSo I bought my first vmax a couple of months ago. Its a 92 that is completely stock with 16,000 mi on it. When I got it, it ran a little rough around the edges but when you twisted the throttle it would take off like a shot.:punk: Now when I say a little rough around the edges it wasnt that...

Hey all, I am really trying to get this thing dialed in. My current set up is this: Morley Muscle Kit 152.5 mains PAJ1 90 PAJ2 170 Stage 7 needles 2nd clip from blunt end plus washer in Sean's kit (2.5?) A/F screws 2.5 turns out Hindle 4-2-1 exhuast with IXIL can Slides drilled and stage 7...

I am a young guy 25 years old. I'm already sick and tired of all the time i spend making someone else alot of money. Had an idea or two and needed some feedback from you all. I want to move to north carolina ( maybe asheville area) and start a small do it yourself motorcycle shop at the base...

So I'm in the process of building my vmax and monday we are starting the paint. Planning on doing red race stripes from front to rear render with realistic flames in the middle of the faux tank engulfing this image. Colors will be red , black and Chrome to go along with the 06 vmax. Before I...