carbs

Ok it's late here at work and had a break so decided to do some cleaning on my carbs. They are all still together just like I pulled them off the engine. I took breakclean and bathed the carbs from top to bottom and everything cleaned up real nice. Maybe I am paranoid being carbs scare me to...

Well ,my carbs have been off, cleaned and set with a mercury vacume gauge. The bike seems to lop a little at idle " and adjusting lean mixture screws doesnt help". From 1000rpm to 3300 rpm it seems to run "un clean" like a small mild suge . And some times when I'm gearing down I burp the...

Hey Tom, How's the availibility on the Top Fuel Carbs? Todd

Need to replace slide diaphrgms on my 1995 Vmax carbs. Bought new diaphragms & need to remove the old diaphragms from the slides. Anybody know the best way to do this? Randy

Up until 10 month ago I had never ridden or driven anything that had carbs. Prior to Jan. I had never touched a carb. But now I have checked float levels, bench adjusted the floats, changed out main jet, changed out PAJ2 jets, adjusted my needles and synced my carbs. Some of them a couple of...

Group, I'm in the process of purchasing a VMAX with this set up. 4" velocity stacks are in use right now. I expect that I'll need to change them, they're real awkward with a riders knees. One of the frequent contributors to this forum has modified 4" stacks with a 45 degree twist, to offer...

Looking for a set of carbs (besides ebay) Randy

Hey all, Ever want that brand new carb look but didn't know how to get it? Check out this site for a cool how to on the cheap. Chris http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/

Sorry for this dumb question but I'm nowhere near my bike right now and am trying to figure domestic shipping costs. Anyone know what size box the carbs will fit in (still racked together) and how much they will weight? It'd be sweet if they would fit in one of the large flat rate boxes...

just noticed after reading in the forums a bit that someone mentioned to check the gas that you drained to indicate crud collecting in ur carbs, got home from work and looked.... is this normal? come to think of it i have noticed a some what oily goo on my air box connector where it connects to...

will the carbs from a 98 vmax fit and work on my 92 vmax without any modifications ? :ummm:

I'm trying to get my carbs out so I can give them a good chem dip. I found that the screws on the top are stripped out and my channel locks can't get them out because of the way they're positioned. How the heck am i supposed to get these dang things out? they are the ones on the top, I got...

This winter im either putting in morleys 1500 or pcws 1500, Prob going to go with Seans mtr . My bike now has hmf exhaust with seans jet kit (sasyvboost controller) whould like to keep the v-boost if possible and run the stock carbs, but if i cant use the v boost i think id get a few more hp by...

Check out this simple fuel injection conversion kit. You can still keep the V-boost! You don't need trigger wheels to run it. It triggers off the negative side of the #1 coil. Simple easy, quick. It uses the Microsquirt or Megasquirt ECU. www.roadstercycle.com

Check out the CV to throttle body conversion kit for the Vmax. I been working hard on figuring a way to fuel inject my Vmax engines and came up with this conversion that works great and you can still use the V-boost. It's a very simple setup and uses a Microsquirt or Megasquirt ECU. You trigger...

Here's the deal. I bought my 86 about a month ago, and I've been through hell with it(apparently I bought it with a bad wrist-pin). I replaced the wrist-pin, piston, rod etc with the help of Sean Morley, and that's all well and good. Here comes the weird part.... When I'm cruising along on the...

Ok, so my Carbtune Pro has arrived and I've finally got time to go at the carbs.... I'll preface with the following statement: I've never done this before and know nothing more that what I have researched on this forum and on the net. However I feel confident enough that I'm not 'afraid' to...

I realize the fuel pump fills the carbs after the bike has sat but where does the gas go that it is replacing ? Evaporate ? Or does it go to the engine and end up in the oil ? Thanx for your help .

Hi again, Took my bike to Yamaha dealer and was told that I need to sync my carb, they want $350 to do it. I saw a topic on here that shows how to do it and looked up the machine on ebay, it runs around $95 Do you guys know if it worth taking it to the shop for the $350 or easy enough to follow...

If R1 carbs will be play with Vmax? With others carbs will be better play with vmax than stock carbs?