clutch

Well last year had clutch issues.. 35k on the bike and slipped bad. Changed the clutch and fluids in the fall rode it and seemed ok.. but the bike just didnt have the power my other max's had.. This one- marks 4-2 - morleys air box mod and carbs . Been on several rides and seemed about the...

Hello out there! Need help again. Put on a "new starterclutch", and it worked for about four good starts. Then as you can guess, no start. It engages for a couple cranks then the starter starts to free wheel. Over and over with no grinding sounds, like I heard before I replaced. So I took it...

Cattsmaxx had this posted in new members--- Can anyone help? cattsmaxx cattsmaxx is offline Junior Member Join Date: Oct 2012 Location: Bakersfield, Cali Posts: 2 My VMax: 2012 VMax-Black Default Re: Are you a new member? Come here and say hi! I am having A PROBLEM WITH MY CLUTCH ...

For the last 5 years my clutch lever has had a problem. It gets soft feeling and doesn't want to pump up. I rebuilt the master cylinder a couple times but the last time it didn't help. figured the master was just worn out so bought a new master cylinder. Installed it and it's the same way. I...

Okay, here's the deal. It's ridding season again in my lovely town. Over this winter I seem to have forgotten I have small hands... I'm a big fella with a size medium paw. Now the clutch lever is very heavy on this bike I don't mind that. But I'm reaching for both my clutch and my brake. It...

Does anyone have info for the guy that does the mod on the starter clutch? He puts in a new sprag clutch. Thanks!

Hello, around almost an year ago when I bought my Vmax, when I got home with the motorcycle I noticed a small beautiful oil leak dripping from the pan, as you can see in the picture. I noticed that it leaked only after use for like 2 hours. I noticed also that the clutch master cylinder fluid...

So my bike has been sitting since Nov and when it was parked everything worked fine, but now the clutch lever has about 1/3 the resistance it usually has when I pull it in. I started the bike a week or so ago and when I pulled in the lever to shift to 1st it didn't quite stall but it took off...

Weather was up to almost 60 today. So I took my 06 with 10k out for a spin. I did the DD clutch install probably a year or so ago. I get on bike feels fine at first then it starts to feel as if the clutch isn't disengaging. Feels as though I am riding around with the clutch half engaged...

Can some 1 tell me how long is the clutch line is from the master cylinder to the hard tube that the clutch line screws on top of the motor. Also what is the screw size and pitch thread that go's in the female end of the stock clutch line on top of the motor. "O" can I install 10mm x 1.25...

has anybody used any of these clutch kits...... KG? EBC? or Vesrah? lookin at buying a clutch kit. tore it down to do the shift segment, and noticed the disks are getting thin, and now are starting to slip when i feel like going to wot after shifting gears and i'm not into vboost yet. just...

I tried starting the bike after a flat battery using a booster. I drove it until the battery charged and then when i tried starting it i heard a small knock from the starting clutch. The bike started ok and has been behaving ok for a couple of days. Should i start worrying for the starting clutch?

Problem solved! At least for now, hopefully I get some time out of it before I see the issue again, I have the slave cyl seal replacement kit, but want to ride her a little before I tackle that job. :)

Just wondering, has anyone bought and tried the starter clutch and gear on ebay? Just wondering if it's a good product or not. Here is the link for the auction. http://www.ebay.com/itm/321314845789?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

I haven't had much time to ride this year. But the last 2 times I've went to ride I have no clutch pressure. The reservoir is empty and once I add fluid and start pulling the lever I'm seeing air bubbles. I'm 99.9% sure I need to change the master cylinder. Is there anything else that could go...

Hi all: I hope everyone is doing okay and staying safe. Question for you: I just installed a Nissin radial clutch master cylinder on my Max, but I hate the stock lever....too long and "clunky." I'm hoping to find a company that sells aftermarket levers for Nissin hydraulic radial...

If someone can, please help me. I followed all the directions and bike starts in neutral but I can pull in clutch to try gears. Anyone know why? Thank you

:bang head: What part does the small clutch plate in the back of the clutch basket play in the Gen 1 ??? And can the small wrap around spring be removed and a standard plate be installed with out any future problems ?

Hi, im new to the vamx and am either getting clutch slip when I hit about 6000rpm or the tyre is spinning up? Anyone have the same issues? I can have the bike in 5th doing 25mph and roll on the throttle and no clutch slip? Its happened a few times now but only when I really nail the trottle when...

I'm looking to order a clutch cover gasket and it lists the '86 then '96 and newer. Huh? Is there more than 1 gasket for the gen 1? I thought they were all the same. His place is 35% cheaper then everywhere else but I've got a '90 and don't want to order the wrong one. I'm hoping the supplier...