cop

anyone running into any issues with their COP mod ? I have about 500 miles on my R1's. I blew one fuse on 100 run (while passing which kinda sucked) a few weeks ago, replaced the 10A fuse with a 10A breaker and have had no issues since. pulled serious RPM/power and just cruising since...

On the left-hand side, I made sure that the COP wiring (arrowed) was in front of the V-boost servo, so it wouldn't get in the way of the V-boost cable or cam movement: the wiring is routed through the opening in the heat shield (arrowed) that the HT lead used to go through: Now the left...

Ok so back to fitting the COPs, finally. Here are the front wires prepared - notice that the #4 wire has to be longer to reach down to the right-hand cylinder from the connector on the left which is pretty close to the main harness: Here's #4 connected... ...all taped up... ...and fed...

To remove the front coils, the only way to access all four coil mounting screws is to move the bracket that hold the CDI, ignition vacuum advance unit and V-boost servo. Here's a full view of it; the blue arrows shows the #4 coil screws, and the red arrows show the bracket mounting screws (x4)...

As I went to do the front COPs, I thought there was no way I would leave the original coils in place - after all the COPs mod is as much about saving weight and space as it is about better performance through less resistance in the coils circuit and better reliability through removing those...

Here is a pictorial of the install for Birdoprey's COP's . I apologize for the poor pic quality and the layout. This is the only way I know how to set it up. There are 10 pics, Numbered from the left, top row-#1 - #6, bottom row #7 - #10. #1- COP and wires with crimped spades #2- Factory...

Hey,WTF happened to Coprunner?

- mehoffz24 ------------------ Sender Information Userid: 1276 User Name: mehoffz24 What is your name?: jack ----------------------------- Request Information: Award ID: 13 Name: Mod Monkey Description: Awarded to users with innovative ideas that they have modded their VMax with. Recipient...