dyno

This is from one of the Yahoo lists with actual dyno numbers. HP seems lower than what I expected since Yammy claimed 197 at the crank Cycle World has released their VMax dyno testing. 174 rwhps and 113ftlbs at the rear wheel on the CW dyno. The most powerful motorcycle they have ever tested...

Hey Guys!!!! Central Florida area. Saturday 9/27/08 Kissimmee MotorSports is having their Fall Celebration. http://www.mykissimmeemotorsports.com/default.asp (go to events calender) FALL CELEBRATION 2008 09/27/2008 - 09/27/2008 Come join us for Free food, Free dyno runs, Free...

took the v-max to a local sportbike event this past sat. decide to put it on the dyno and just wanted to know if the numbers i got are normal for a 97 with 12000 miles on it. the motor is about the only thing that hasnt been modded on the bike and i'm planning on installing sean's jet kit in...

This is one of my old dyno runs with my 1991 vmax.

Have any of the Max tests in the bike mags published dyno numbers on the new Max? Sorry if I have missed them.

Greetings all. Talked to my dyno guy today, who worked for Yamaha when the Max was introduced. He has done only 3-4 Max's, usually they have been messed with (like mine). The last one had flatsides, which he ended up with 135hp at the rear (I wish) In order to make his work a little easier, I...

I scanned my actual dyno sheets so you guys could help me figure out my actual hp and tq as they seem to be pretty inconsistent. I have a 2006 Vmax with 4-1 kerker exhaust and K&N filters and a stage 7 jet kit. Tell me what you guys think.

First off the bike is a 1985 with 15k on it. Full kerker 4-2-1 and a stage 7 kit. It was 90 some degrees outside with very high humidity. Let me start by saying I am a little disapointed with the numbers. It made 108 hp and 69 tq. :ummm: The air/fuel was good most of the way hovering around...

This sheet came with the bike I purchased last week. I'm glad I didn't pay for it. There is no TQ curve. Bike had just over 800 miles on it at the time. Test was done by the PO at the dealer he purchased it from after it was serviced.

See the runs I made. I need to go down to 155 mains to lean out the top a bit but it runs great! The 122 numbers were with Dales Walkers stage 1and his full exhaust. The 124 number was with Sean Morley's kit and the needles spaced up a bit. The 123.9 numbers were with Seans kit and needle...

Here is a video of the dyno. http://www.youtube.com/watch?v=mdz4mvGI2FM

Hello, I just had my bike dyno'ed on a dyno jet pull behind trailer at Sturgis on the River. This is the list of Mods to the bike. Fully ported heads 12:1 forged Pistons Heavy duty valve Springs Stage 7 kit kerker 4 into 1 (large baffle) Dynatek Coils Stock Ign (dyna being sent back to be...

Just got back from the grand opening of the new Crossroads Motorsports. They had a ton of things going on including a mobile dyno for $25.They didn't have a sniffer though so I didn't feel like wasting my time and money. The funny thing was watching the Harley guys.A guy with a S&S 110C.I...

Check the Sunday, June 22 date on the Calendar for more info.

I moved up to SoiuxFalls, SD last year from DesMoines, IA. I used to take my bike to VanWahl in Indianola to get tuned. Does anyone know of any Dynoshops closer to SiouxFalls that are familiar with the V-Max carbs? Going to Omaha or Fargo,ND is no problem I have family in both areas. I just...

just bought a 99 kerker stage 1 10k miles former owner took the bike to tnt performance dyno in tn not sure what size jets but played with the baffles . from what he told me . i guess its true they thought enough of the bike to put it on there web sight 124.4 83.5 after 42 runs. bike runs great

I finally got my Max dynoed :punk: Mods (engine): Doma Racing cans K&N air filter Dyno jetting Results: 117,5bhp @ 8707 81,05Ft/lb @ 6306 It runs a bit rich (14 - 14,5:1) so I might drop MJ a size or two or increase air flow somehow. This should bring bhp up to 120 :punk: ER

Shortly after we got my machine running right after I first bought it, (http://www.vmaxforum.net/showthread.php?t=1874) we started playing around a little... We opened up the air box lid, started the dyno pull and one of my guys took a 10 lb. N20 bottle and opened the main valve close enough to...

Hi guys...I'm new here, but thought I'd post my dyno results for those that are interested. I ran my stone-stock, 35,000 mile 1995 machine on the rollers here at work about 1 1/2 Summers ago as soon as I bought it from the second owner. The bike was meticulously taken care of and had every...

Well guys, here's what we found out. Add in your stories since I wasn't able to keep up with everyone. We had been thrashing for the last week to get an engine built and installed in Scott Petersons 92 Vmax and finally finished it up Sat (dyno was Sun). A quick break in and we loaded it in...